| |
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerRoger from Tucson AZ
Silverware basket was broken. Had to replace
I had to use 2 screwdrivers to unsnap the handle off the old basket to put on the new basket. That was it. Easy.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerKenneth from Coventry RI
Basket bottom fell out and silverware would fall through basket.
I just took out old basket and removed the old handle with a screw drive. Then I snapped the old handle on the new basket and placed it into the dish washer rack. All done!!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerRobert from Charlotte NC
Existing silverware basket developed a hole
Went to partselect.com and located a replacement silverware basket. Was easy to locate and the order process was easy. The new silverware basket arrived within the week, did not use any special delivery options. Great experience!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMarc from Carol Stream IL
Old silverware basket was broken
removed the old basket, pulled off the handle and put it on the new basket. It was quick and easy!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerLaura from Glenmoore PA
Holes in the bottom of the basket causing silverware to slip out
The greatest thing about this repair was how quickly the part came from your warehouse. I literally ordered this on Friday afternoon and it arrived Saturday - less than 24 hours! The basket comes without the handle, so I had to pry the handle out of the old basket and snap it in place, but that was simple and viola! a brand new basket! Thank you!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customerkatherine from colorado springs CO
Bottom fell out of basket
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerELIZABETH from REVERE MA
Silverware kept falling through old basket
took out the old one, put in the new basket
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerSean from Salisbury NC
Broken utensil basket
I just put the new one in. It fit perfectly. It's a better quality part than the original. I'm very happy.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerELIZABETH from LOS ALAMOS NM
Broken silverware basket
The only challenge was identifying the correct model as I made the order. Your search of parts database made it easy and was able to order the correct part.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerCharles from Exeter NH
Thermo cutoff switch failed
Removed front cover, ~12 screws, which exposed the wiring harness and associated circuit boards. Per instruction supplied with new thermo switch, removed and replaced switch.
|
3 of 14 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:More than 2 hours
ToolsPliers, Screw drivers, Wrench set, Wrench(Adjustable)
CustomerALLAN from LOS ALTOS CA
Salvaged dishwasher--no motor
Replacing motor assembly was hard because gasket difficult to compress. Had to carefully use car jack to push down on motor assembly to engage final clamp.
Result was $800 dishwasher for $20 plus $200 for parts.
Thanks
|