http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/55659.gif
See part 11 in the diagram
http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/55659.gif

Silverware Basket - Gray

PartSelect Number PS2341016

This part has been redesigned by the manufacturer and is now a complete full basket with handle and covers.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning dishes properly.
  • Leaking.
  • Door latch failure.
  • Noisy.
  • Compare At

    $11.48
  • You Save

    $1.91
  • Your Price

    $9.57
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 101 reviews What's this?
 

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerWilliam from Mundelein, IL

Corroded rack and broken basket

Although the (top) dishrack assembly included the nylon wheeles, it was easier to replace the old one by disengaging it from its wheels and installing the new rack on the old wheels kept in the slider track. The snap hook that held each wheel to the old rack was popped loose (finger pressure) and the old rack removed. The new rack was held in place and each of the four wheels snapped to it. Each wheel fits into a wire post on the basket and the plastic hook snaps onto the wire frame. The most difficult part of the 'repair' was removal of the handle from the old silver ware basket. I used screwdrivers to simultaneously pry the four tabs of the halde out of the slots on the basket and pulled (hard!) the handle off. It snapped easily into place on the new basket.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMatthew from Hopkinton, MA

Leaking dishwasher

pulled out old door gasket and on the third try it fit perfectly.

took out 8 screws on the door, seperated the plaster inner door from the outer. undid 2 screws to replace the dispenser door latch gasket.

dropped the new silverware basket into the dishwasher and put the 8 screws back in.

it closes a bit tigher now, but it does not drip...

Thank you...

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Silverware Basket - Gray

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerSharon from Fairfield, CA

Bottom of basket fell apart & silverware would fall though holes

Replacement basket did not include handle so needed to pry old handle off broken unit to use on the new one. Used screw driver to pop loose clips which attached to basket. Had to stick tooth picks broken in half under them to hold out until all four clips were opened at once - then handle could be pulled off. Easily snapped it back on to the new basket and repair was done. Can't get any easier than this!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Silverware Basket - Gray

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerMelisa from San Antonio, TX

Silverware basket was cracked/broken and spoons etc. Fell through

seeing as how my husband was out of town, I inserted a regular flatware knife in each of the four slots that held the handle in place on the basket. I then slowly pushed down on the handles of the knives on opposite sides of each other to unlock the handle from two slots on the basket and then went on to push down on the other two flatware knives on the opposite sides...sure enough, the handle came right off...less than 5 minutes in all to take the old handle off from the old basket and then snap it into place onto my newly acquired basket.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerReavis from Royal Oak, MI

Maytag baskets fall apart and need to be replaced

Removed old unit, snapped handle onto new unit and installed it
NOTE: THE DIMENSIONS SHOWN ON THE ORDERING GRID ARE NOT ACCURATE. THE UNIT IS MORE LIKE 9 INCHES LONG INSTEAD OF 11 AND 6 INCHES WIDE AS OPPOSED TO 7.
This error occured on several websites so I suspect that Maytag's specs are off.

Help other customers find the most helpful instructions.

Were these instructions helpful?