3 of 3 people found this instruction helpful
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
CustomerVerl from Belgrade MT
Latch handle and control panel broken.
Open door and remove all screws to remove front panel. Seperate front panel from door. Remove cover of control box. Disconect ribbon cable that connects control panel to control box. Disconnect wires attached to the switches on the latch handle. Remove all screws attaching panel control to front panel. Remove control panel and latch handle assemblies. Replaced with new parts making sure gasket and seal are in place for the vent. Assemble in reverse order.
Cost of parts about $60. Time to repair less than 30 min.