BBB A-Plus
2340963-1-M-Whirlpool-6-917727-Control-Panel-White.jpg
2340963-1-S-Whirlpool-6-917727-Control-Panel-White.jpg 2340963-2-S-Whirlpool-6-917727-Control-Panel-White.jpg

Control Panel - White

PartSelect Number PS2340963

This control panel comes with the touchpad and the ribbon cable to attach to the control board.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door latch failed
In Stock

  • Compare At

    $189.95

  • You Save

    $31.66

  • Your Price

    $158.29
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 NEXT > 1-4 of 4

 

14 of 16 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers

CustomerKEVIN from Woodbury MN

Latch broke completely and then shortly thereafter due to the extra pressure put on the control panel handle lip the top part of the panal broke off.

removed all screws that held the door liner in place @ 10 then removed the 6 screws that held the control panel in place. control pane came off easily. as the latch was broken that came off easy too. The replacement panel and latch fit perfectly. the only trouble I had was inserting the flat wiring bundle from the new control panel to the old circuit board connector. Take your time and really seat the flat wire bundle into the circuit board. it needs to be nice and snug. if it's not only a few of the wash functions will light up when pressed. once the connection is tight all functions worked. replace all screws - easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers

CustomerTeresa from chico CA

We had a brokeddn latch and crack panel

opened door and unscrewed screws. Once we got that off we needed to shut off the power which was the hardest part as my husband had to go to the main box and flip breakers till figured out which one it was. With help holding parts and wires so we didn't have to discoonect everything it was really easy to just reconnect the new parts, place in the latch and screw the panel back in. Everything fit like a charm and when we turned it on it worked. So we are very happy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsNutdriver, Screw drivers, Socket set

CustomerWilliam from Houston TX

Handle / latch broke and then control panel

Removed front panels of dishwasher
Removed defective latching mechanism
Replaced control panel and latch
Replaced front panels

Each step had to be achieved twice due to alignment issues. Current control panel does not have a ll the same functions enabled (for example the delay wash feature doesn't work)

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerscott from pasco WA

Broken door latch and control panel

removed screws from damaged parts and replaced

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 NEXT > 1-4 of 4