http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/54124.gif
See part 1 in the diagram

Control Panel with Touchpad - Black

PartSelect Number PS2340956

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $185.38
  • You Save

    $30.90
  • Your Price

    $154.48
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 2 reviews What's this?
1-2 of 2
 

5 of 7 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerWilliam from Santa Clarita CA

Wanted to change from white to stainless steel panel with black controls due to kitchen remodeling

The parts arrived sooner than expected, thanks for the speedy service.
I unscrewed the front door panel, then the control panel and unplugged the control cables. Once all screws have been removed the control panel came off easily and the front panel needed to slide upwards to remove it from the spring loaded hinges.
Then I installed the new panel in reverse order, connected the control wires and assembled the unit. At first it di not work as one of the wires slopped out of place while installing, I disassembled it again, reconnected the wires and put it all together again.
It was not very difficult but needed a second person to hold the unit until everything was in place.
That's it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Control Panel with Touchpad - Black

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

Customercurt from McConnell IL

Did not know what wash cycle as control lights out.

Removed all the inner door panel screws with a 1/4" nut driver, then removed a inner control board. Pulled the flat cables out and unscrewed several more screws holding the control panel. Had to use a 8" stick to keep the inner panel out of my way while removing and installing the new control panel. Re-inserted the flat cables and replaced all the screws. Was a very easy repair job and only took 30 min. Must admit was the first time using the repair service and had professional answer to my problem in less the 20 min. I am sure I saved more then $300.00 by doing it myself versus hiring a repair man. I highly recommend this service and if needed will use them again.
Thank You Very Much!
Curt Andree, McConnell, Ill.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2