2340910-1-S-Whirlpool-6-917075-Discharge Pump Housing
2340910-1-S-Whirlpool-6-917075-Discharge Pump Housing 2340910-2-S-Whirlpool-6-917075-Discharge Pump Housing

Discharge Pump Housing

PartSelect Number PS2340910

This part is located under lower spray arm.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Noisy.
  • Not cleaning dishes properly.
  • Not draining.
  • Compare At

    $22.79
  • You Save

    $3.80
  • Your Price

    $18.99
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.7 / 5.0, 41 reviews What's this?
31-41 of 41
 

0 of 1 people found this instruction helpful

Parts Used

  • Discharge Pump Housing

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerCinde from Pine Beach NJ

Loud noise

disasembled lower spray piece by piece got to pump found in 2 pieces looked up part number , went to PartSelect found part ordered. it came with in 24 hours . had left tools etc. out, installed . only thing to watch is adjusting new part by screwing shaft to the same hight as original pump so spray spins without hitting sides.$20 cost instead of buying new machine or paying to have repair sevice.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Discharge Pump Housing

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerEd from Racine WI

When the water was pumping out the pump made a rather loud noise

Took it apart, using the blown up view on your website and replaces the part. It only took about 20 minutes including cleaning the water discharge filter.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Discharge Pump Housing

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerWayne from Badin Lake NC

Noisey

Took your percentage of parts and went to that part and found the bottom portion (plastic disc) had seperated from housing. Ordered and replaced. Works like new. Thank you for good pictures and info. WW

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

Tools

CustomerRick from Cedar Rapids IA

Bottom of housing fell off of pump and rode on top of impeller

removed lower spray arm strainers and other parts to replace upper pump housing

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Discharge Pump Housing

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsSocket set

CustomerHugh from Maspeth NY

Dishwasher made a loud deep grinding noise

First of all, The part came in 2 Days which was amazing. I removed the jump up nozzle,lower washer arm and filter gaurd by unscrewing the cap (no tool needed).Then I removed the the Pump cover and secondary filter assembly by unscrewing the 6 screws with an allen wrench. I then removed the rinse arm then I unscrewed the discharge housing nut by hand. I then removed the three screws hold ing the discharge housing in place using a socket, replaced with new one and put it all back together the opposite of the way I took it apart. No more loud grinding sound. I hope this helps. It took about 15 minutes. I have a few extra pieces but the dishwasher dosn't seem to miss them. Just Kidding

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Discharge Pump Housing

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerGale from Green Bay WI

Noisy did not wash dishes

Took out the old part and replaced it

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Discharge Pump Housing

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsSocket set

Customernicholas from agawam MA

Noisy

removed inside cmponents,removed washer discharge which was broken. replaced with new one purchased from parts select.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsScrew drivers, Socket set, Wrench(Adjustable)

CustomerJoseph from Oak Park IL

Lower wash arm not turning, poor cleaning of dishes

Determined wash arm not turning. dismantled washer assembly to impeller. Found discharge assembly had broken causing a plastic plate inside of it to cut holes in the sides. Water was being forced out the sides instead of up into washer arms. Replaced discharge assembly and just in case, the impeller as well. Reinstalled impeller and discharge. Took out filter and cleaned it thoroughly. Reassembled washer arm assembly. dishwasher works like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers, Wrench(Adjustable)

CustomerAndy from Port Deposit MD

Started to make loud noise

this repair is done from the inside,remove lower basket,screw off the center nut (its not to tight came off by hand, no tools)take off spray arm,take all the torque bolts out,remove the screen filter take the 3 bolts out of the pump housing and remove, mine came apart that was the noise. The impeller may not need to be replaced but mine had marks on it so I did.Install new seals clean up parts and put it back together with new parts ..works as good as new!!! I had my new parts in 1 (ONE)day PartSelect thank you. Andy,

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers, Socket set, Wrench set

Customerlouis from norfolk MA

Grinding noise

replaced broken part

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 3 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers, Socket set

CustomerRodney from Hamburg PA

Loud noise & water would not dscharge

removed racks disassembled lower unit as per diagram -reassabled

Help other customers find the most helpful instructions.

Were these instructions helpful?

31-41 of 41