10 of 13 people found this instruction helpful
Level of DifficultyEasy
Time to do repair:15 - 30 mins
CustomerRandy from Corona CA
Latch assembly broken as well s panel control
I removed the screws from the inside of the door
I removed the existing Control panel (carefully) because the circuit board was also attached here.
I installed the new latch assembly on the new control panel.
I reattached the circuit board and reinstalled all of the screws - now it works great!
Everything for under $100 and less than 30 minutes! Thanks for the parts!
2 of 5 people found this instruction helpful
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsNutdriver, Screw drivers
CustomerDexter from Westborough MA
Latch mechanism/handle broken
disassembled door panel
installed new handle, switch and control panel
reassembled door panel