http://www.partselect.com/Schematics/GE/GE_Thumb/00106834i03.gif
See part 421 in the diagram

CORD SET - GAS

PartSelect Number PS2340034

This part works with the following brands: GE, Hotpoint & Kenmore.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.8 / 5.0, 1 reviews What's this?
1-1 of 1
 

6 of 7 people found this instruction helpful

Parts Used

  • CORD SET - GAS

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers, Socket set

CustomerCoretta S. from Napa CA

The electrical cord had been severed.

First I laid the cabinet on its front so that it was easier to remove the back sheetmetal screws on the right hand side. I then opened up the right side of the cabinet and held it open with a 2X4. I was able to reach inside the cabinet and unplug the wiring. It was more difficult reaching the ground wire and removing the screw that it was attached to however i found that using a socket with an extension was the most effective. The cordset popped right out with the assistance of a flat head screwdriver. The cordset and ground wire were set in place and attached without trouble.
It was difficult trying to figure out how to open up the cabinet without instruction!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-1 of 1