Quick Question!

Have you ever purchased from PartSelect.com before?

2339984-1-S-GE-WD13X10052-Door Latch with Gasket
2339984-1-S-GE-WD13X10052-Door Latch with Gasket 2339984-2-S-GE-WD13X10052-Door Latch with Gasket 2339984-3-S-GE-WD13X10052-Door Latch with Gasket http://www.partselect.com/Schematics/GE/00118464i01.gif

Door Latch with Gasket

PartSelect Number PS2339984

This door latch prohibits the dishwasher from operating when the door is open. The gasket is used around the door to keep the dishwasher from leaking.

This part works with the following brands: GE, Hotpoint & KENMORE®.

Compare At

$160.93

You Save

$26.82

Your Price

$134.11
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.8 / 5.0, 2 reviews What's this?
1-2 of 2
 

3 of 6 people found this instruction helpful

Parts Used:
  • Door Latch with Gasket
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Brad from Saint Paul, MN

The locking mechanism broke so the door handle was loose and didn't work.

Took off panel to get to where the door handle is. Unplugged the old broken one and replaced with new one. Super easy to do.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Door Latch with Gasket
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: ryan from NOVATO, CA

Dishwasher would not start

I thought my dishwasher was broken and I actually ordered another dishwasher. I went to the GE website and my model number came up not found. I did some further research and found partselect. My model number came up right away. For the fraction of the price of a new unit I decided I would give it a shot. I got next day delivery and installed the part right away. Step 1: turn the power off 2. Open the dishwasher and take the screws out on the inside of the unit. 3. The front handle area comes off. 4. Take a picture of how the unit is wired (I wired it backwards at 1st and blew the breaker) 5. Use needle nose pliers and take off the four wires. 6. Put the new handle on the same way the old one came out 7. Put all screws back. That's it.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2