11 of 19 people found this instruction helpful
Level of DifficultyA Bit Difficult
Time to do repair:15 - 30 mins
ToolsNutdriver, Pliers, Socket set
CustomerJANET from SANTA CLARITA CA
I could not change times on the analog clock, and when using pliers, the knob broke.
The replacement was a digital clock instead of analog. The directions were a little confusing, but adequate for the change. We removed the old clock, and followed the dirctions for replacing it. We made three tries to get the wires correctly connected and on the third try, it worked fine. However, I had to return the three knobs since the digital had push buttons. It fits into the space perfectly and we are very happy with it.
3 of 12 people found this instruction helpful
Level of DifficultyReally easy
Time to do repair:30 - 60 mins
ToolsNutdriver, Screw drivers
CustomerMICHAEL from NEW WAVERLY TX
The timer was out. Decided to repair other parts due to the fact that the stove had not been used in 3 years.
First I removed the back of the stove. Then I removed the two screws that hold the top element. I then reached into the oven and removed the element. Replaced the element and screws. I then took the timer out by removing the two screws and unpluging four wires. I replaced the timer the same way I took it out.