2339242-1-S-Frigidaire-316442301-Surface Element - 8" - 2600W
2339242-1-S-Frigidaire-316442301-Surface Element - 8" - 2600W 2339242-2-S-Frigidaire-316442301-Surface Element - 8" - 2600W 2339242-3-S-Frigidaire-316442301-Surface Element - 8" - 2600W

Surface Element - 8" - 2600W

PartSelect Number PS2339242

This coil element has looped terminal ends.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Cooktop element not heating.
  • Compare At

    $21.62
  • You Save

    $3.60
  • Your Price

    $18.02
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Surface Element - 6"

Part Number 2339239

This element has looped terminal ends and comes with a black medallion center.

$12.52
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 19 reviews What's this?
1-15 of 19
 

37 of 40 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerDavid from Encinitas CA

Burner shorted out

I followed the directions by clipping wires to old burner socket, splicing the wires to new terminal block, screwing down new "block bracket," and plugging in new burner.

Help other customers find the most helpful instructions.

Were these instructions helpful?

15 of 18 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

CustomerSteve from North Troy VT

Replaced elements

pull the element out and slide the new element in.No tools needed,it's that easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

10 of 15 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsScrew drivers

CustomerMatthew from Columbus IN

Burners on 53 year old range kept going out

When we bought our home less than a year ago, we had three functional burners on our 40" wide 50's classic Kelvinator (not close to standard size these-a-days). After a few months of use, two more burners went out for good and we were stuck using the back left burner for all of our cooking. I opted for the premium burners and made sure to compare my terminals with the ones online to be sure they mounted the same. I removed the burners and terminals, clipped the wires going into the terminals, and removed the top of the stove. I followed the directions that came with the new terminals, pushed in the new burners and viola! All four burners now work. I gave the stove a general cleaning and now my 1954 Kelvinator looks and cooks like it is brand new. It was easily the best $109 I've spent on my home.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerDaivid from North Attleboro MA

Burner wont heat all of the time

removed old terminal block . cut wires and spliced new terminal block and insulated with shrink wrap. Very eazy

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Surface Element - 8" - 2600W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMargaret from Spencer OH

8" stove top element would not warm up.

It was simple.............the range-top tilts up so I proped it with a stick of wood, pulled out the old burner and plugged in the new one (when I saw how inexpensive the new element was I orderd two to replace the other 8" because it didn't look long for this world either). The whole operation took less than 10 min. no tools or batteries required!!!!!!!!!.........no-mus-no -fus.

Your prices were the lowest I found on-line, keep up the great work!!!!!!!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Surface Element - 8" - 2600W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJan from Storm Lake IA

Dead burner

I unplugged the dead burner and plugged in the new burner. Very easy. No tools needed.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerBrian from La Crescent MN

Burned out baking heating element in oven

Removed element by loosening two screws, disconnected heater element and connected new element and reattached to oven wall. Turn on oven to check for heater to work. Confirmed heater worked. Repair complete.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 7 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers

CustomerGilbert J from HERCULES CA

To replace the termianl block and the elements

I ordered the correct parts(elements) and PartSelct sent the correct Frigedaire substitute parts.One of the 3 piece metals underneath the element is too long and the element does not fit on top of the bowl of the burner. Frigidaire should make the right substitute parts (elements) for that model.The terminal block took sometime to replace and it works with the old element.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Surface Element - 8" - 2600W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerThomas from Elizabeth City NC

Burner was damaged

snap out the old one and snap in the new

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerFernando from Orlando FL

Replace element & drip bowl

Just replace the parts. Too easy for an old man.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Surface Element - 8" - 2600W

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

Customermichael from gurdon AR

Surface would not get hot

had to replace a piece of the wire harness and als o the surface element prongs were melted so i replaed them and now the stove is working perfect..thanks parts select you saved me hundreds of dollars,

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Surface Element - 8" - 2600W

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerGeraldine from Hoxie AR

Burner burnt out & 1 plug in bad

I started to work on it & in came a friend & saw a helpless female & took to the job & finished it real fast & efficently.Great repair. Gearldine

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Surface Element - 8" - 2600W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customerhelen m from eureka MT

Burnurplate broke

ordered a new one and I put it inn.Pluged inn and I was ready to cook!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Surface Element - 8" - 2600W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerKathy from Fremont OH

Burner cooked things very slowly.

Pulled old burner out, pushed new one in. WHAT A DIFFERENCE!! Heats very quickly, now.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customerwallace from cynthiana KY

Drawer would fall out when opened, one burner would not lay flat

My wife had fussed at me for two years to fix the drawer, I kept forgetting to pickup the glides. I did a Google search and found your site, ordering parts was a breeze. Parts came in two days after ordered. After removing drawer new glides popped right in with no tools needed. The burner that never would lay flat I pulled out and installed new one with out use of tools. It lays nice and flat, now my pancakes are level !!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 19