Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS2339242
This coil element has looped terminal ends.
This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.
This part fixes the following symptoms:
This element has looped terminal ends and comes with a black medallion center.
I followed the directions by clipping wires to old burner socket, splicing the wires to new terminal block, screwing down new "block bracket," and plugging in new burner.
Help other customers find the most helpful instructions.
Were these instructions helpful?
pull the element out and slide the new element in.No tools needed,it's that easy.
When we bought our home less than a year ago, we had three functional burners on our 40" wide 50's classic Kelvinator (not close to standard size these-a-days). After a few months of use, two more burners went out for good and we were stuck using the back left burner for all of our cooking. I opted for the premium burners and made sure to compare my terminals with the ones online to be sure they mounted the same. I removed the burners and terminals, clipped the wires going into the terminals, and removed the top of the stove. I followed the directions that came with the new terminals, pushed in the new burners and viola! All four burners now work. I gave the stove a general cleaning and now my 1954 Kelvinator looks and cooks like it is brand new. It was easily the best $109 I've spent on my home.
removed old terminal block . cut wires and spliced new terminal block and insulated with shrink wrap. Very eazy
I ordered the correct parts(elements) and PartSelct sent the correct Frigedaire substitute parts.One of the 3 piece metals underneath the element is too long and the element does not fit on top of the bowl of the burner. Frigidaire should make the right substitute parts (elements) for that model.The terminal block took sometime to replace and it works with the old element.
It was simple.............the range-top tilts up so I proped it with a stick of wood, pulled out the old burner and plugged in the new one (when I saw how inexpensive the new element was I orderd two to replace the other 8" because it didn't look long for this world either). The whole operation took less than 10 min. no tools or batteries required!!!!!!!!!.........no-mus-no -fus.Your prices were the lowest I found on-line, keep up the great work!!!!!!!!!
I unplugged the dead burner and plugged in the new burner. Very easy. No tools needed.
Removed element by loosening two screws, disconnected heater element and connected new element and reattached to oven wall. Turn on oven to check for heater to work. Confirmed heater worked. Repair complete.
snap out the old one and snap in the new
Just replace the parts. Too easy for an old man.
Pulled old burner out, pushed new one in. WHAT A DIFFERENCE!! Heats very quickly, now.
had to replace a piece of the wire harness and als o the surface element prongs were melted so i replaed them and now the stove is working perfect..thanks parts select you saved me hundreds of dollars,
I started to work on it & in came a friend & saw a helpless female & took to the job & finished it real fast & efficently.Great repair. Gearldine
ordered a new one and I put it inn.Pluged inn and I was ready to cook!
My wife had fussed at me for two years to fix the drawer, I kept forgetting to pickup the glides. I did a Google search and found your site, ordering parts was a breeze. Parts came in two days after ordered. After removing drawer new glides popped right in with no tools needed. The burner that never would lay flat I pulled out and installed new one with out use of tools. It lays nice and flat, now my pancakes are level !!!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.