Quick Question!

Have you ever purchased from PartSelect.com before?

2339242-1-S-Frigidaire-316442301-Surface Element - 8" - 2600W
2339242-1-S-Frigidaire-316442301-Surface Element - 8" - 2600W 2339242-2-S-Frigidaire-316442301-Surface Element - 8" - 2600W 2339242-3-S-Frigidaire-316442301-Surface Element - 8" - 2600W http://www.partselect.com/Schematics/Frigidaire/Q1IFPO1W.gif

Surface Element - 8" - 2600W

PartSelect Number PS2339242

Manufacturer Part Number 316442301
Manufactured by Frigidaire

This coil element has looped terminal ends.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Element will not heat.

Compare At

$17.03

You Save

$2.84

Your Price

$14.19
Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Surface Element - 6"

Part Number 2339239

This element has looped terminal ends and comes with a black medallion center.

$11.55
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 19 reviews What's this?
1-15 of 19
 

41 of 46 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: David from Encinitas, CA

Burner shorted out

I followed the directions by clipping wires to old burner socket, splicing the wires to new terminal block, screwing down new "block bracket," and plugging in new burner.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

21 of 25 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: Steve from North Troy, VT

Replaced elements

pull the element out and slide the new element in.No tools needed,it's that easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

17 of 24 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Screw drivers
Customer: Matthew from Columbus, IN

Burners on 53 year old range kept going out

When we bought our home less than a year ago, we had three functional burners on our 40" wide 50's classic Kelvinator (not close to standard size these-a-days). After a few months of use, two more burners went out for good and we were stuck using the back left burner for all of our cooking. I opted for the premium burners and made sure to compare my terminals with the ones online to be sure they mounted the same. I removed the burners and terminals, clipped the wires going into the terminals, and removed the top of the stove. I followed the directions that came with the new terminals, pushed in the new burners and viola! All four burners now work. I gave the stove a general cleaning and now my 1954 Kelvinator looks and cooks like it is brand new. It was easily the best $109 I've spent on my home.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 7 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Daivid from North Attleboro, MA

Burner wont heat all of the time

removed old terminal block . cut wires and spliced new terminal block and insulated with shrink wrap. Very eazy

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 11 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Pliers, Screw drivers
Customer: Gilbert J from HERCULES, CA

To replace the termianl block and the elements

I ordered the correct parts(elements) and PartSelct sent the correct Frigedaire substitute parts.One of the 3 piece metals underneath the element is too long and the element does not fit on top of the bowl of the burner. Frigidaire should make the right substitute parts (elements) for that model.The terminal block took sometime to replace and it works with the old element.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
  • Surface Element - 8" - 2600W
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Margaret from Spencer, OH

8" stove top element would not warm up.

It was simple.............the range-top tilts up so I proped it with a stick of wood, pulled out the old burner and plugged in the new one (when I saw how inexpensive the new element was I orderd two to replace the other 8" because it didn't look long for this world either). The whole operation took less than 10 min. no tools or batteries required!!!!!!!!!.........no-mus-no -fus.

Your prices were the lowest I found on-line, keep up the great work!!!!!!!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
  • Surface Element - 8" - 2600W
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Jan from Storm Lake, IA

Dead burner

I unplugged the dead burner and plugged in the new burner. Very easy. No tools needed.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: Brian from La Crescent, MN

Burned out baking heating element in oven

Removed element by loosening two screws, disconnected heater element and connected new element and reattached to oven wall. Turn on oven to check for heater to work. Confirmed heater worked. Repair complete.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Surface Element - 8" - 2600W
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Thomas from Elizabeth City, NC

Burner was damaged

snap out the old one and snap in the new

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Fernando from Orlando, FL

Replace element & drip bowl

Just replace the parts. Too easy for an old man.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Surface Element - 8" - 2600W
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Kathy from Fremont, OH

Burner cooked things very slowly.

Pulled old burner out, pushed new one in. WHAT A DIFFERENCE!! Heats very quickly, now.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: Eric from Olmsted Falls, OH

The bake element and 2 burners wouldnt heat up

The bake element just unbolts from the rear of the oven then it pulls twoard you so you can access the connections. The burners just pull upward and disengage from their connectors. Topped off with the nice new trays and it looks and works like new!!! .......but lots cheaper

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Surface Element - 8" - 2600W
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: michael from gurdon, AR

Surface would not get hot

had to replace a piece of the wire harness and als o the surface element prongs were melted so i replaed them and now the stove is working perfect..thanks parts select you saved me hundreds of dollars,

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Surface Element - 8" - 2600W
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Geraldine from Hoxie, AR

Burner burnt out & 1 plug in bad

I started to work on it & in came a friend & saw a helpless female & took to the job & finished it real fast & efficently.Great repair. Gearldine

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Surface Element - 8" - 2600W
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: helen m from eureka, MT

Burnurplate broke

ordered a new one and I put it inn.Pluged inn and I was ready to cook!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-15 of 19