2339203-1-S-Frigidaire-316032411-Oven Thermostat - 125V 60Hz
2339203-1-S-Frigidaire-316032411-Oven Thermostat - 125V 60Hz 2339203-2-S-Frigidaire-316032411-Oven Thermostat - 125V 60Hz

Oven Thermostat - 125V 60Hz

PartSelect Number PS2339203

This part establishes and maintains the internal temperature of the oven cavity.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Little to no heat when baking.
  • Oven is too hot.
  • Gas igniter glows, but will not light.
  • Compare At

    $70.48
  • You Save

    $11.75
  • Your Price

    $58.73
In Stock
Order within the next 10 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.7 / 5.0, 4 reviews What's this?
1-4 of 4
 

14 of 22 people found this instruction helpful

Parts Used

  • Oven Thermostat - 125V 60Hz

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerWilliam from Springville CA

Oven getting too hot, no control on the heat settings.

First i want to thank you for the quick responce, i got my order in one day. Took top of stove off, took out the old part, put the new one in, made several test to adjust the heat settings put everything back together alls well, now my wife can cook things without burning everything, thank you from the bottom of my heart, a happy wife means a happy man. William L Zeis.

Help other customers find the most helpful instructions.

Were these instructions helpful?

13 of 19 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerThomas from Pinehurst MA

Oven would heat up in the off position.

Oven thermostat was bad comes with copper tube, to register the oven temp. Un pluged the wire to the electronic pilot. Removed the face plate, six screws, feed the copper tube thru the oven and stove top. Unscrewed the thermostat, install the new thermostat fed the tube back thru snaped it in place, connected the wires and everything was fine. Oven is now working fine..

Help other customers find the most helpful instructions.

Were these instructions helpful?

13 of 21 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

Customergordon from PALMDALE CA

Oven became hard to turn on stripping the d shaped oven knob and oven would not turn all the way off oven knob and oven knob and oven would not turn all

prop up stove as if to clean inside open oven door unplug stove follow copper wire from thermostat down into oven take pliers and pop out thermostat rod in upper left hand side of oven pull it out from top then remove all five knobs from three inch face plate remove two screws that hold thermostat to the face plate then remove six screws that hold the face plate disconnect two wires on the thermostat and slide out with copper wire and rod just reverse process install new parts with screw gun you can be in and out in 30 minutes

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 18 people found this instruction helpful

Parts Used

  • Oven Thermostat - 125V 60Hz

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerLawerance from Fairfax VT

Oven would not light

Lifted top burner plate, removed all knobs, removed front plate that holds oven burner control. Removed burner control feedind thermocouple through hole at top of oven. Installed new oven control, fed t-couple back through hole and placed in holder. Put front plate back in place and re-installed knobs. Oven works great now, lights at 200* where as before would not light at less than 400* setting. Took only a straight blade and phillips screwdriver to do the job in less than 1 hour, that included cleaning the front plate and knobs while they wereoff.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4