2338877-1-S-Whirlpool-W10207571-Turntable Motor - 60 Hz
2338877-1-S-Whirlpool-W10207571-Turntable Motor - 60 Hz 2338877-2-S-Whirlpool-W10207571-Turntable Motor - 60 Hz

Turntable Motor - 60 Hz

PartSelect Number PS2338877

This motor rotates the glass turntable in the microwave.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $64.85
  • You Save

    $10.81
  • Your Price

    $54.04
In Stock
Order within the next 10 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 3 reviews What's this?
1-3 of 3
 

4 of 6 people found this instruction helpful

Parts Used

  • Turntable Motor - 60 Hz

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerRandy from East Peoria IL

Turn table not turning

My part arrived the next day. That was a surprise to receive it that quick.
I removed the lower panel to gain access to the motor. Disconected the 2 electrical leads and removed the 2 screws that held the motor in position. Installed the new motor, reconnected the leads and reinstalled the lower panel. It was a very easy reapair. I took all of 10 minutes to complete.
I will definately use Parts Select the next time I need a repair part for any appliance.
Great service

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 7 people found this instruction helpful

Parts Used

  • Turntable Motor - 60 Hz

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customermichael from montgomery TX

Turntable erratic and noisy

Removed 6 screws from bottom cover and 2 from motor cover. Unplugged motor and installed new motor. Plugged in new, Installed cover. Done

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 4 people found this instruction helpful

Parts Used

  • Turntable Motor - 60 Hz

Level of DifficultyVery Difficult

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerwilliam from Virginia Beach VA

Turntable stopped working--- unsuccessful so far with the repair

removed screws from the bottom cover, installed the new motor and reinstalled the cover. The turntable is still not working. wonder if the power supply for that motor is not working. I noticed the internal microwave light glow and then burn out at about the same time as the turn table stopped working. Could that power supply provide power to both the motor and the internal light? can't find the schematics for the location of the power supply so i can test for output power.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3