Quick Question!

Have you ever purchased from PartSelect.com before?

233886-3-S-GE-WB19K36           -Dual Oven Safety Control Valve
233886-3-S-GE-WB19K36           -Dual Oven Safety Control Valve 233886-1-S-GE-WB19K36           -Dual Oven Safety Control Valve 233886-2-S-GE-WB19K36           -Dual Oven Safety Control Valve http://www.partselect.com/Schematics/GE/00111029i01.gif

Dual Oven Safety Control Valve

PartSelect Number PS233886

This gas oven safety valve ensures that no gas is released until the igniter has received the proper voltage needed to ignite the gas range.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Little to no heat when baking.
  • Gas igniter glows, but will not light.

Compare At

$156.14

You Save

$26.02

Your Price

$130.12
Order within the next 3 mins and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.5 / 5.0, 2 reviews What's this?
1-2 of 2
 

17 of 22 people found this instruction helpful

Parts Used:
  • Dual Oven Safety Control Valve
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Wrench (Adjustable)
Customer: Patrick from Marysville, WA

Oven temperature was erratic

I loosened the three gas line fittings on the valve, removed the two screws holding it to the frame, and removed the four wires (spade connectors). Then I reversed the process to install the new valve. It was that easy. This was my last resort after replacing the temperature probe and the control unit. It fixed the problem.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

7 of 10 people found this instruction helpful

Parts Used:
  • Dual Oven Safety Control Valve
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers, Wrench set
Customer: Frank from Greentown, PA

Oven burner would not light.

I thought that when the burner didn't light it was the control valve at fault. After shutting off the gas, I changed the valve by removing the wires, undoing the tubing, then unscrewing the unit from the back of the unit. This worked one time. It turns out that if there isn't enough voltage from the burner, the valve won't open. I found this out after I mistakenly thought that the new valve was faulty. Check the voltage from the burner before you do anything else.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2