Safety Valve - 3/8" Inlet

PartSelect Number PS233871

This gas oven safety valve ensures that no gas is released until the igniter has received the proper voltage needed to ignite the gas range. This valve has a 3/8 of an inch inlet as well as a half of an inch PSI. This safety valve has a twelve inch capillary and it comes with a pilot thermocouple and an opening. Use this valve with your GE brand gas oven.

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $204.92
  • You Save

    $34.15
  • Your Price

    $170.77
In Stock
Order within the next 10 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.2 / 5.0, 2 reviews What's this?
1-2 of 2
 

3 of 3 people found this instruction helpful

Parts Used

  • Safety Valve - 3/8" Inlet

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Wrench set

CustomerDanny from Beech Creek PA

Oven wouldn't work

First I turned off the gas , Then removed three screws , unhooked the gas line and removed the safety valve. Then reinstalled the new safety valve,Turned on the gas , checked for leaks, Tried the oven. Every thing worked fine

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Safety Valve - 3/8" Inlet

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers, Wrench(Adjustable)

CustomerJon from Los Angeles CA

The griddle would not heat

1st lift out the heavy steel griddle.
2nd test pilotless igniter.
3rd check the primary flame.
4th locate part # on the safety valve assy.
I never heard of the brand "Five Star" and I couldn't find any documentation for it either. An internet search finally informed me it came from the Brown Stove Works in TN. I then learned that some models were sold with GE badging (labeling) which me got to Part Select dot com's catalog where I found an image of the part I needed.
5th order the part
6th install the valve and reassemble the burner
7th test
8th put griddle back in place

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2