2338628-1-S-Whirlpool-W10166967-Electronic Control Board
2338628-1-S-Whirlpool-W10166967-Electronic Control Board 2338628-2-S-Whirlpool-W10166967-Electronic Control Board 2338628-3-S-Whirlpool-W10166967-Electronic Control Board

Electronic Control Board

PartSelect Number PS2338628

Used with double ovens.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Little or no heat when baking.
  • Compare At

    $363.89
  • You Save

    $60.65
  • Your Price

    $303.24
On Order
Recycling Rebate Available
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.5 / 5.0, 2 reviews What's this?
1-2 of 2
 

10 of 18 people found this instruction helpful

Parts Used

  • Electronic Control Board

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsNutdriver

CustomerJohnny from Charlotte TN

Bottom element not heating

First checked voltage to element and only getting 120 volts.
Checked web site for problem and 23% said heat sensor. Replaced heat sensor and did not fix problem. Replaced circit board and fixed problem. Solder point on relay on back of old circit board was burned. Might could have resoldered but already had new part before we took the old one out. Spent extra $50 and 2 days when should have taken out circit board first.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Electronic Control Board

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerJames from Pawleys Island SC

Upper oven would not heat or broil

Easy enough, hardest part was removing the original wire connectors from the original board. The connectors were on very tightly. It occured to me that it might be cost effective to send the orginal failed unit to a central remanufacturing site for say a $5 or $10 reward. You could include a label and a prepaid shipper to sent there in the boxes you sent me. This would be something a charitable company could do and would result in cost savings all around.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2