2337855-1-S-GE-WD12X10277-Single Wheel Axle
2337855-1-S-GE-WD12X10277-Single Wheel Axle

Single Wheel Axle

PartSelect Number PS2337855

This axle attaches the dishwasher wheel to the rack. Wheel is not included. Sold individually.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Not cleaning properly.
  • Unusual Noise.
  • Door won’t close.
  • Compare At

    $1.31
  • You Save

    $.22
  • Your Price

    $1.09
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Lower Rack Wheel - Front or Rear

Part Number 958945

This slotted rear wheel is sold individually. It is gray in color and does not come with the attaching axle.

$1.93
In Stock

Lower Rack Wheel

Part Number 2322303

This slotted wheel is sold individually. It is white in color and does not come with the attaching axle. This part has been redesigned, and may be wider than the original.

$1.59
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 163 reviews What's this?
 

5 of 6 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerWilliam from Ramsey NJ

Lower rack would no longer roll out. Had to lift out lower rack.

Once we ordered both the "Stud Roller" and "Roller Lower Rack" the repair was simple.

The previous studs mostly disitegrated, so their removal was not an issue. The wheels pulled off easily.

I recomend getting new studs and rollers for all of the wheels on your rack. For me, that was 8 wheels and 8 studs.

First, take the rack out and flp it upside down in a convenient working space. Next, remove all of the old wheels and studs from the rack and discard. Then, snap the new wheels on to the new studs. Next, atached the stud (with the wheel) to each of the 8 spots on the rack. Put the rack back in the dishwasher and walla!

I can't beive that I waited almost two years to make this simple repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJan from Hendersonville TN

The rollers on my dishwaher kept falling off and the lower rack wouldn't roll in or out.

We removed the remaining rollers, inserted the studs into the rollers and attached to the lower rack. Easy. I can't believe we put up with this for so long. We appreciate your quick service. So much easier than going shopping and waiting for the parts to come in and then having to go pick them up. Thanks for being there.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRichard from Mahwah NJ

Several wheels on the lower rack of the dishwasher were broken

Couldn't have been easier. First, I inserted the wheel axles into the 8 wheels I bought. Then I just pushed them into place enough so that the clips on the wheel axles locked in place. The whole thing took 5 minutes. No tools necessary. Anyone can do it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerSusan from Silver Spring MD

Wheels kept falling off the dishwasher rack

This is one of those things that after you do it, you wonder why you didn't do it sooner. Installation was a snap - literally. All I did was remove the wheels from the bottom dishwasher drawer (they didn't stay on anyway...and one had fallen off mid-wash and melted). I was able to re-use the wheels and simply snap in the new axels - which have a far superior design. I ordered a couple extra wheels to replace the one that melted and to have on hand...just in case. Delivery was incredibly fast - I received the parts the day after I placed the order. Why didn't I do it sooner?!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJesse from Moberly MO

Rollers constantly fell off of lower rack

I pulled off the old rollers and studs and pushed out the old studs and replaced with the new ones. Then I popped the new studs and rollers back on. Job completed and it has been wonderful. The new studs are much more industrial like than the ones that came on it. What a relief.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerLaura from Roanoke VA

Missing wheel on bottom rack of dishwasher

Just snapped the stud roller through the center of the wheel and then attatched it to rack.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

Tools

CustomerMichael from Winter Springs FL

Poor shelf extraction/retraction action!

Simple enough to remove the existing dishwasher shelves . . . then tweak off the old axles and rollers and replace them with the new ones. Trying this yourself? Don't be dismayed at first if the parts you just bought aren't exactly the same configuration as the ones you pulled off! The new configuration axles secure just fine with a little thought and pressure in the right places. Last word: The parts were received in just two DAYS after the order. Now the dishwasher shelves are gliding like the day we installed it!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerBeth from West Chester OH

Stud was broken on 4 wheels and rach would not roll

I ordered a set of 8 studs and rollers as recommended in some of the other reviews. First, I inserted the stud into the wheel PRIOR to putting the set on the rack. This was a simple repair and makes all the difference in the world for a stay at home mom who runs the dishwasher twice a day.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Single Wheel Axle

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

Customersean from oakland gardenns NY

Clips on wheeles were broken

replaced clips that were much better made.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerTodd from Johnsonville NY

Lower rack rotted and wheels fell off

Simple replacement. Also note lower rack comes with all wheels attached

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJay from Lynnwood WA

Top tray would pull out due to stops being worn and missing. Also bottom rack had missing rollers

Removed racks and replaced snap in rollers in bottom shelf and installed new stops in top rack.

No tools needed

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

CustomerChristopher from Barrington RI

Existing wheels continuously falling off

Took out the main lower rack, removed all the wheels, inserted the studs into the wheels first and then snapped the wheels onto the rack. Real easy to fix, however, I don't think the original parts should have gone as fast as they did. Overall, not happy with the dishwasher itself.

Help other customers find the most helpful instructions.

Were these instructions helpful?

64 of 189 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDonna from Burlington CT

Rollers/clips of lower rack kept falling off due to poor design and improper sizing of front rollers.

The repair was quite easy.
You simply take the new rollers and attach the pins to each of the rollers purchased. I gladly remove the old roller units. I placed each of the new rollers onto each pin of the lower rack unit, and snap them into place.
The rack rolls with ease now thankfully!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 6 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMarvin from Lake Worth FL

Bottom tray not moving properly

Install the rollers on the studs first, then snap the assembly onto the tray. Really easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerChris from Medina MN

Original wheels kept falling off, rack would go off track and it drove me crazy

Simple, took five minutes, no tools, problem solved.

Help other customers find the most helpful instructions.

Were these instructions helpful?