| |
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerVikas from Chicago IL
Replacing dishwasher wheels.
Multiple dishwasher wheels on the bottom sliding rack had come off. I somehow lost the wheels so I ordered a few replacements. They were fantastic! Better then the originals.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
Tools
CustomerRobert from Lake Forest CA
Wheel slide down on the heat coil
PULLED THE BOTTOM RACK OUT. TOOK THE BACK WHEEL OUT ON THE RIGHT SIDE WHICH WAS DISFIGURED BECAUSE IT MUST HAVE TOUCH THE HEATING COILS. EXAMINED THE OTHER 7 WHEELS AND THEY APPEARED TO BE IN GOOD SHAPE. I PUT THE AXILE THRU THE CENTER OF THE WHEEL AND FORCED IT ON THE RACK-ROD. IT SEEMED TO CLICK INTO PLACE. I PUT THE LOWER RACK IN THE DISHWASHER AND IT WENT SMOOTHLY BACK AND FORTH. I HAVE A SPARE JUST IN CASE THIS HAPPENS AGAIN.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJon from Chelan WA
Needed lower dish rack wheels and the local guys wanted $11.95 and partselect had them for $1.97 so I bought additional spares.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
Tools
Customerkathleen from Washington DC
All wheels on dishwasher rack were defective
Replaced worn wheels with new ones from your company. After months of wrangling with the dishwasher peace reigns in the kitchen. Great service. Told all my neighbors about PartsSelect.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerHoward from Montgomery Village MD
The lower tray wouldn't roll because the wheels fell off.
Removed the wheels and the axles from them and put new axles in place on each wheel then replaced the wheels on the tray.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
Tools
CustomerTheresa from St. Anthony MN
All the wheels on the lower rack of the dishwasher were going bad
We took off the old wheels, pushed the axles into the new wheels, then installed onto the lower rack. Works great, slides beautifully!
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerDAVID from NORFOLK VA
Axel broken
Easy to install - there has been a modification of the Axel since original which will make it last longer.
15 secods to install.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerConnie from Boonton NJ
The wheels on the lower rack of the dishwasher would fall off or bend so that they no longer could support the rack.
I removed the old wheels. Then, I snapped the new axis in on each new wheel. Next, I pushed and fastened the wheels onto the dishwashers' lower rack.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerCurt from Lake City FL
The wheels on the r.H. Side, lower rack were broke
The wheels on the lower wash rack had fallen off. I had tried to re-install them, but they kept coming off. I ordered new ones and they came very quickly. I removed the old wheels and studs and replaced them with the new ones. (make sure you order studs because these are the parts that failed) The new studs have a design change and should last much longer than the original.
The new wheels simply snap onto the new studs, and the whole assembly snaps onto the wire "axle" on the wash rack. It's a simple fix, and well worth the few dollars it cost to buy them.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:30 - 60 mins
Tools
CustomerRobert from Gothenburg NE
Wheels were falling of the lower rack
I just pulled the old ones off and snapped the new ones on. Be sure you put the rollers on the studs first and then put the studs on the rack. Also order new rollers although they may look fine it is well worth the eight bucks extra The whole thing took about 5 minutes
|
1 of 6 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJoel from Port Washington NY
I needed to replace broken wheels on my dishwasher rack and a cracked plastic cap on a water filter
I had called the manufacturer and their prices were outrageous and I still didn't have the part numbers. The partselect.com website was so easy to use that I instantly looked at the line drawings and was able to figure out what to order. It was a snap and I am not the most handy person. Their prices were good, and though I paid for the cheapest shipping, I got the parts the next day, which shocked me. They were an excellent company to deal with.
|
1 of 6 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJoan from Wildwood MO
Bottom rack would not roll out properly
Removed lower rackand several old stud rollers . reapplied them and then attached the new wheels
The parts arrived within 24 hours of me ordering. Excellent service. Thanks so much
|
6 of 48 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:More than 2 hours
ToolsScrew drivers
CustomerMark from Omaha NE
Control module went out - causing the heating element to super heat, melting several of the plastic interior parts
I replaced the control module, and effected plastic interior parts - tested wihout heat, then re-tested with heat dry - performed beautifully. This is a pretty expensive unit that would cost around $1500 to replace new. And, Sears wanted $1500 to repair, so I saved a bunch doing it myself for about $350.
|