This comes set from the manufacturer for Natural Gas. It also includes the conversion to Liquid Propane.
This valve automatically cuts off the flow of gas at a certain pressure.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Justin W - October 15, 2019
Verified Purchase
Fit the unit
Part was as described
★★★★★
★★★★★
Kyle N - March 8, 2018
Verified Purchase
Works great
The part itself is slightly longer than the original part making installation a bit tricky under my stove top, however it has worked beautifully since installation! Thank you Part Select!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Luis
September 17, 2021
Does this regulater come with lpg orafices?
For model number JGP320EV1WH
Hello Luis, Thank you for your inquiry. This part does not come with lp orifices. To convert it, you would just remove the hexagon shaped screw nut from the top of the regulator, flip the white insert inside the cap over and screw the nut back on. Hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Matthew
February 13, 2018
Unable to control burners Flame, will not increase above small Flame. Affects only front 2 burners
For model number jgp989bk2bb
Hi Matthew,
Thank you for your question. If you are unable to adjust the flame on 2 of your burners, the problem is likely too much or too little air flow and you will need to adjust the burner's air shutter. The shutter is located near the front of the stove. You will need to make sure all the controls are off and then lift up the cooktop and unscrew the setscrew of the shutter until it is loose. Do not unscrew it completely. Turn the burner on high and then make the adjustments you have to with the shutter until the flame is the height you want it. Once you are complete, retighten the setscrew and close the cooktop. For more information, you will need to consult your owner's manual. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
