Blower Vent Kit - Wire Harness Included

PartSelect Number PS2334193

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Will Not Start.
  • Compare At

    $190.28
  • You Save

    $31.71
  • Your Price

    $158.57
In Stock
Order within the next 1 hr and 9 mins and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 4 reviews What's this?
1-4 of 4
 

3 of 4 people found this instruction helpful

Parts Used

  • Blower Vent Kit - Wire Harness Included

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers

CustomerRex from Canton OH

Cycle wouldn't finish because of "venting" error code.

Had to pull the dishwasher all the way out, but once I removed the insulation surrounding it I found the vent on top. I removed the old vent, unplugged the old wire harness and plugged in my new one. Installation couldn't have been easier!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

  • Blower Vent Kit - Wire Harness Included

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

Customerjeffery from fayetteville TN

Giving a vent open error

pulled dishwasher out of cabinets and replaced the vent assembly and wiring harness for vent, this was a simple replacement. after the dishwasher is out of the cabinets, unscrew the nut on the inside of the top of the tub and the vent assembly is on the outside of the tub, disconnect the wiring harness from under the bottom and reverse to install new one

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Blower Vent Kit - Wire Harness Included

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerJohn from Tucson AZ

Dishwasher gave er uo error

After reading that others had this error and had fixed it by cleaning or replacing the vent at the top back of the dishwasher, I gave it a try. Removing and cleaning the vent did not help, so I ordered and installed a new one. It was very easy! The hardest part is pulling out the washing machine! The vent has an easy to remove nut inside the washer, and taking it off on the outside merely involved detaching the wires and reattaching the wires of the new vent and putting it in place. Solved the problem, no service call!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Blower Vent Kit - Wire Harness Included

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customerdavid from marlborough MA

Plastic's were melting. Error message displayed. Would not run.

I located the vent assy. on the top of the tub. I un plugged the wires from the harness. I undid the large nut form inside the tub at the top. Removed the vent assy. Put the new one in it's place. And it works perfectly and I saved over $250 doing it myself.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4