Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS2330885
This selector knob may also be known as the laundry appliance control knob and is meant for your washer or dryer. This model is sold individually and takes a D-shaped shaft. The purpose of this part is to attach to the shaft of a rotary or starter switch, which is located on the control panel. To make this installation you should remove your old selector part by grabbing it with a firm grip and pulling it straight off. If the metal insert came off with the old part, pull it off as well, making sure the new knob will have enough room to snap in its place. No tools are required to make this repair.
This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.
This part fixes the following symptoms:
watched you tube video... a breeze
Help other customers find the most helpful instructions.
Were these instructions helpful?
Simply pressed knob on appliance.
My wife simply removed the knob from the package and pushed it on. No tools were needed and she felt satisfaction that she was able to "fix" the problem on her own.
First I unscrewed the back panel to be able to lift the cover off the control panel. I then removed the cover off the control panel and slid the knob into the locking tabs. I replaced the cover and screwed the back panel back into place.
I ordered the knobs at less than half the price I paid before from the retailer. The knobs came in the mail very quickly. I took the knobs from the package and put them on. Easy repair, and I was especially happy with the ease of ordering and quick delivery.
Unscrewed the back cover of the control console.Unscrewed the one screw holding the facia plate to the control console at center of timer switch, then removed the start control knob and the heat selector control knob. Had to use a flat blade screw driver to wedge the heat selector knob off its spindle.Although all screws removed, unable to remove facia plate due to plastic strip beneath it. Tried to remove the strip, held in by four tension points - one each end and two along the middle. Could not remove it without breaking the securing points off the back of the strip in the middle (plastic also). After strip came off, easy to remove the facia. Identified the proper location of wiring attached to defunct start switch, and then removed the switch by turning clockwise a short distance. Inserted the new switch, turned counterclockwise til it snapped into position.Reversed steps to re-attach facia and back cover of control console. Despite the broken prongs in the middle, the plastic strip under the facia still stays in place by tension and is secured on the ends, so looks unnecessary to replace it. Bad design to not let you see how it is attached before you have to break it to get it loose!Cleaned all surfaces and tested new start switch, which worked perfectly first try. Re-attached venting duct and repositioned dryer next to washer. Task completed.
old knob was broken so didn't stay on and work so had to use pleris to adjust temperatures when needed but now just put new knob on and we are in buisness and like new again!!! So glad I found your company and had the knob i needed and fast service!! thanks :)
Let me start by saying, I ordered these 2 knobs for my dryer and they came faster than lightning. I was so glad to know that I could order something and have it within 48hours. KUDOS! Onto the actual item, I got the 2 knobs and since it was just the knobs that broke off and not the mechanism itself, I just took the knobs out of the package and put them on the mechanism by pushing on and VIOLA! , I was done!If I ever need anymore parts for any of my other appliances I will sure use Parts Select and I will sure tell my friends about you guys too!! Good Prices.. Fast Shipping.. gotta love it!
This repair took only about 15 seconds to complete. It just involved pushing the new knob on the selector. The provided video should give you the confidence to complete this task.. I invested $11.00 for the part. I would hate to see the cost to have a repairman come and fix this. Worth every penny
remove power cord from outlet . remove upper rear panel . remove 2 wires . remove old switch . . install new switch and wires , replace rear panel , install knob , plug in power cord and check dryer operation ok. 5 min job.
I ordered the part one day & it arrived the next day(UPS-Ground)I replaced broken knob with new one & everythings just fine. Thank you for your prompt service !!
was just a pop off -pop on knob replacement for worn/broken knobs. Easy on ,less than a minute. The BEST part of my repair...finding exactly the parts I needed and fast shipping, also the site for selecting your parts and trouble shooting repairs is extremly customer friendly......highly reoommend your site/services. Thanks
Took broken knobs off and replaced with new ones. Only one fit snuggly; the other two are raised and wobbly.
Just put them on. there wasnt any thing hard to do.
Took it out of package..pushed it on.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.