| |
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerPaige from Charlottesville VA
Plastic door handle on washing machine broke off.
Very simple. Just remove the broken door handle by unscrewing two screws from inside washer door. Replace with the new door handle.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerShirley from Madison WI
Cracked door handle
Two screws to remove the handle and replace with new one
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerRAUL from CORPUS CHRISTI TX
Broken door handle
THE REPAIR ONLY TOOK LESS THAN 15 MINUTES. I WILL BE NEEDING A TROUBLE SHOOTING BOOK FOR FURTHER REPAIRS. I WILL BE LOOKING SOON. THANKS RAUL RODRIGUEZ
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerHarold from Tomball TX
Washer vs 15yr old hormonally challenged girl
When a teen age girl is going through, what I termed as "Bi-Polar" years (ages puberty to 16), they tend to break things with abnormal strenght and misdirected rage.
In this instance my poor washer took the brunt of her wrath, after 2 weeks of being told to do her laundry. this model of washer is a front loader, and the door locks when operating. she just pulled the handle, a black plastic bit, that broke. I looked up the part, ordered and had the thing fixed within 4 days of it breaking. It was two screws and done. now we can wash clothing in the peace of knowing we can open the door.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerTimothy from Fort Wayne IN
Had broken door handle on washing machine
Simple: Just removed 2 phillips screws, threw the broken handle in the trash, & put the new one on with the 2 screws. Problem solved.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerSharlette from Pea Ridge AR
One edge of door handle broke off making it almost impossible to open door
I simply removed old handle by taking out the 2 screws from back of door and then replacing them into new handle . Repair man quoted me 50 dollars plus cost of part ,which was much higher than Part select price . The itemized drawings on the website are wonderful making it easy to order correct part first time .
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerDeborah from Mt. Tabor NJ
Handle broke off when opened
I took the old piece off and put the new one on very easy
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerJeanie from Arcadia IN
Broken handle
removed the 2 screws holding the handle in place,that was the hardest part as the plastic piece that the screws set into was broken and I had to use a piece of tape to pull the broken receptical out. the rest was a piece of cake. delivery was very fast and ordering was so easy! thank you and I am sure I will be doing business with you again! thanks for everything!
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsPliers, Screw drivers
CustomerJudith from Clarkston MI
Washer handle broke off at top screw
HAD TO USE A NEEDLENOSED PLIERS AND A PHILLIPS SCREWDRIVER TO REMOVE THE TOP SCREW WHERE THE HANLE HAD BROKEN OFF. THE BOTTOM SCREW REMOVED EASILY. THE NEW HANDLE SCREWED INTO PLACE IN A COUPLE OF MINUTES.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerMike from Odenton MD
Had a broken door handle
It is very very simple. All you have to do is remove two screws on the inner side of the door and the handle will pop right off. Then put the new handle in its place, and put those two screws back where you took them from, and now it is good as new!!
|