Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS2330842
This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.
This part fixes the following symptoms:
We had to remove the screws and take the door off the washing machine then the door glass ring. Replace and put it back on. It was really easy and save alot in repair bills.
Help other customers find the most helpful instructions.
Were these instructions helpful?
I removed the two screws holding the old handle on and then then installed the new handle
unscrewed the old handle, and screwed the new one on. It only took 2 minutes to fix. Very easy!!
Very easy. Remove 2 screws from the inside of the door. Take out the broken pieces and screw in the new one using the old screws.
Like another commenter, my teenage daughter ripped the handle off at the top in a huff. My husband simply unscrewed the broken handle and replaced it with the new one. We now make sure to open the door from the middle of the handle, not the top.
First I removed the visible screws on the front of control panel. When I tried to remove it I realized it was also being held in place by the top coverof the washer. I next removed the screws holding the top cover in place and slid it back uncovering a few more screws holding the control console in place. The wiring pane was also held on the console with screws so i roved them and popped the old console out. After that I just replaced everything in reverse order and screwed the new console back in place. The door handle was alot more simpler. All I did there was open the door and remove the two visible screws on the inside of the door and the broken handle came off. I placed the new handle in place and screwed it on. These repairs were simple and once done I realized that it took no time at all.
after clearing shelving. It took about 20 minutes to remove the dryer stacked on top, along with the gas line and the vent hose.....Two screws and gently pry the back up with a screwdriver and the top pops off. open the door and remove the 2 screws while reaching down inside and the switch come right up with its 3 plug harness.swap the old switch unit for the new one and slip it back down into place and reinstall the screws, and done in about 15 minutes.my belt is in good shape so I will save the one I bought for later.the handle is 2 screws and took less than 2 minutes.It took about 20 minute to put the washer/dryer units back together and against the wall and running
Very easy to fix. Diagram on web page was very helpful. Part was delivered over night. Great service.
Removed screws and screwed in new handle.
unscrewed old part. screwed on new part. it was a breeze.
One new door handle two screws and 5 minutes later it was like new again. Saved a bundle by doing the repair myself.
After locating the two screws on the inside of the door, I used a phillips screw driver, in a counter-clockwise motion, to take the screws out. I then removed the remaining pieces of the broken handle and then positioned the new handle in the holes seating it firmly in place. The handle had to be held into place while I negotiated the screws back into the holes turning the screws in a clockwise manner.
removed the old handle held in by two screws lined up the new handle and reinstalled screws
removed the two screws that were attached to the old door and put the new door on.
Very simple fix - two screws out - replace handle and reinsert screws. The best part was how quickly I received the parts.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.