2330842-1-S-Frigidaire-134412860-Door Handle
2330842-1-S-Frigidaire-134412860-Door Handle 2330842-2-S-Frigidaire-134412860-Door Handle

Door Handle

PartSelect Number PS2330842

Handle only. Black in color.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Lid or door will not open.
  • Lid or door won’t close.
  • Compare At

    $26.05
  • You Save

    $4.34
  • Your Price

    $21.71
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Flat Head Screw

Part Number 1145713

$6.77
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 25 reviews What's this?
1-15 of 25
 

25 of 32 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerHigh Hope Employment Service from Milan MO

The handle to the door had been broken.

We had to remove the screws and take the door off the washing machine then the door glass ring. Replace and put it back on. It was really easy and save alot in repair bills.

Help other customers find the most helpful instructions.

Were these instructions helpful?

10 of 11 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMichael from Dexter MI

The plastic handle on the door of a front load washer cracked at the top.

I removed the two screws holding the old handle on and then then installed the new handle

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerFrancine from Wolcott VT

The door handle to the front load washer had broken off

Very easy. Remove 2 screws from the inside of the door. Take out the broken pieces and screw in the new one using the old screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customermandy from rock falls IL

Washer door handle broke

unscrewed the old handle, and screwed the new one on. It only took 2 minutes to fix. Very easy!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMary from Oswego IL

Door handle broke off at the top

Like another commenter, my teenage daughter ripped the handle off at the top in a huff. My husband simply unscrewed the broken handle and replaced it with the new one. We now make sure to open the door from the middle of the handle, not the top.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerJuan from Austin TX

The control console broke when we stacked some heavy item on the edge of this front load washer and the door handle broke from wear and tear.

First I removed the visible screws on the front of control panel. When I tried to remove it I realized it was also being held in place by the top coverof the washer. I next removed the screws holding the top cover in place and slid it back uncovering a few more screws holding the control console in place. The wiring pane was also held on the console with screws so i roved them and popped the old console out. After that I just replaced everything in reverse order and screwed the new console back in place. The door handle was alot more simpler. All I did there was open the door and remove the two visible screws on the inside of the door and the broken handle came off. I placed the new handle in place and screwed it on. These repairs were simple and once done I realized that it took no time at all.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerBernard from Towson MD

Broken handle.

Removed screws and screwed in new handle.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMark from Gambier OH

Broken door handle

Very easy to fix. Diagram on web page was very helpful. Part was delivered over night. Great service.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:1- 2 hours

ToolsNutdriver, Screw drivers

CustomerPaul from Fontana CO

No spin, broken handle, everything else worked

after clearing shelving. It took about 20 minutes to remove the dryer stacked on top, along with the gas line and the vent hose.....
Two screws and gently pry the back up with a screwdriver and the top pops off. open the door and remove the 2 screws while reaching down inside and the switch come right up with its 3 plug harness.
swap the old switch unit for the new one and slip it back down into place and reinstall the screws, and done in about 15 minutes.

my belt is in good shape so I will save the one I bought for later.
the handle is 2 screws and took less than 2 minutes.
It took about 20 minute to put the washer/dryer units back together and against the wall and running

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMary from Lithia FL

Handle on the washer broke

One new door handle two screws and 5 minutes later it was like new again. Saved a bundle by doing the repair myself.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerMichael from cape may court house NJ

Door handle on outside cracked at the screws

removed the old handle held in by two screws lined up the new handle and reinstalled screws

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJames from Mt Holly NC

Door handle broken

Very simple fix - two screws out - replace handle and reinsert screws. The best part was how quickly I received the parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerKenneth from Westminster MD

Handle was broken off

After locating the two screws on the inside of the door, I used a phillips screw driver, in a counter-clockwise motion, to take the screws out. I then removed the remaining pieces of the broken handle and then positioned the new handle in the holes seating it firmly in place. The handle had to be held into place while I negotiated the screws back into the holes turning the screws in a clockwise manner.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customermelanie from lake worth FL

Washing maching door handle broke off. The replacement part cost 75% less than the manufactures part, and fits perfectly

arrived in 2 days. Using this company the replacement part cost me 75% less than the manufactures part, and it fits perfectly. It has a Slightly different color, but the price difference was huge. It was Very easy to install in only 2 minutes with a phillips screwdriver using the 2 screws provided. The manufaturer's part was $80 plus $11.00 shipping. This part cost me $25 with shipping. Amazing!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerGeraldine from Lansing MI

Broken door handle

removed the two screws that were attached to the old door and put the new door on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 25