| |
21 of 22 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
CustomerJim from Sherwood OR
The dispenser door was broken, would not close.
First I removed the (8) screws holding the front door panel on. Then I took the door panel off and unpluged the ribbon wiring so the door was free from the dishwasher. I then unpluded the wiring going to the dispensor. Then I removed the (6) screws holding the dispensor into place and then sprung the holders (2) so the dispendor could be removed. I stuck the new dispensor in its place, pushed it in so the (2) metal holders locked into place, then replaced the (6) screws, pluged the wiring into the new dospensor, pluged the ribbion wiring back in and replaced the front door panel and reinstalled the (8) screws that hold the front door into place. And then tested and everything worked fine.
|
12 of 14 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMitchell from Lake Forest IL
Existing silverware basket got holes in the bottom allowing silverware to fall through
I'm really handy, but this one was a no-brainer. Lift the damaged silverware basket out of the dishwasher and place the brand new one back in its place. It took more time relishing the new basket and how brand new it looked then the actual repair took.
|
2 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerAmy from Sykesville MD
Disintegrating silverware basket
The original silverware basket was falling apart. Literally disintegrating.
I ordered a new one, from PartSelect. I received it in 2 days.
Not tools needed. I simply removed the defective basket and replaced it with the new one.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsScrew drivers, Socket set
CustomerFrank from Hummelstown PA
Control panel buttons were worn out
Replaced the plastic control panel- need to remove the PCB's which can be tricky not to damage them
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerTom from Broken Arrow OK
Silverware basket had developed holes
pulled out the old basket and installed the new basket. no tools required.
The easy part of this was how fast we received the part without any special delivery request. That was nice. We also have a 46 inch TV down and the repair man has been waiting for parts for 10 days! You should handle tv parts!
|
1 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customerandre from sugar land TX
Silverware basket was ruptured
Nothing to it. Pulled the old one and subbed a new one. Sort of a one handed affair. What was amazing was how easy it was to navigate the site, find the exact part I needed, order it, get it quickly and not pay a small fortune for the privilege. Way to go guys.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerScott from Medford Lakes NJ
Basket had broken bottoms
Removed old basket and dropped in new one. Doesn't get much easier.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerLinda from Marietta GA
The silverware basket was time for replacement
Slid the old silverware basket out, put the new one in. It was a perfect match, easy delivery (came quicker than expected) flawless from our part. Thank you for quick delivery, the right part and it came quickly - can't ask for more than that!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJoe from west chester PA
Silverware basket was broken
The delivery time was incredible. I was told 3-8 business days, but it arrived the next day. I was shocked! Good stuff partselect dot com!!!!
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customeredith from midland TX
Hard water in west texas is not good for internal parts
so, so easy! Took out the corroded parts and put in the new. the tine row took the longest - had to unclip and reclip.
|