2327831-1-S-Whirlpool-W10137328-RETAINER
2327831-1-S-Whirlpool-W10137328-RETAINER 2327831-2-S-Whirlpool-W10137328-RETAINER 2327831-3-S-Whirlpool-W10137328-RETAINER

RETAINER

PartSelect Number PS2327831

This clip is designed to hold a timer knob in place.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $14.48
  • You Save

    $2.41
  • Your Price

    $12.07
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 3 reviews What's this?
1-3 of 3
 

5 of 8 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerSteven from Chatom AL

After 13 years, the timer on our maytag washer just "wore out".

I received the part next day, just as promised. I removed two screws to take the top panel off the washer, removed the two screws on the old timer and put the new timer in. Had the repair done withing 15 minutes - I have replaced this before, I am 54.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 8 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers, Socket set

CustomerLinda from Crestview Hills KY

The timer was not working causing the washer to not cycle properly.

Pulled knob off timer. Removed four screws at the top of the piece holding the timer in place. Pulled the wires out of the fitting. Then reversed procedure to put back together.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerArthur from Philadelphia AL

Timner knob stopped catching

Lost Timer knob retaining clip & spring when I removed it before ordering. Put spring on, then knob then retaining clip. Problem solved.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3