2326380-1-S-Whirlpool-UKF8001-Ice and Water Filter
2326380-1-S-Whirlpool-UKF8001-Ice and Water Filter 2326380-2-S-Whirlpool-UKF8001-Ice and Water Filter

Ice and Water Filter

PartSelect Number PS2326380

This part has a high-quality carbon filter that reduces contaminants. Replace the filter annually or when the filter light is on. Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Water dispenser will not dispense water.
  • Ice maker will not make ice.
  • Leaking water.
  • Unusual Noise.
  • Fridge section too cold.
  • Ice maker dispenses too little ice.
  • Touchpad does not respond.
  • Compare At

    $59.38
  • You Save

    $9.90
  • Your Price

    $49.48
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 33 reviews What's this?
1-15 of 33
 

505 of 521 people found this instruction helpful

Parts Used

  • Ice and Water Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDouglas from Byron NY

Light on to order water filter

Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.

Help other customers find the most helpful instructions.

Were these instructions helpful?

375 of 393 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerHootie from Joshua TX

Ice maker leaking at first then quit making ice all together

unplugged refrigerator and shut off water, removed one screw and loosened two more, after removing one side of the ice bucket rail, unplugged electrical from old ice maker. Then I removed the bail and out on new one, reinstalled ice maker in reverse order from taking it out.

Help other customers find the most helpful instructions.

Were these instructions helpful?

186 of 265 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerStanford from Bowling Green KY

The crisper drawer was broken on the slides and kept falling out. Also the filter needed changing as the red light was on.

By sliding the drawer out and lifting it up at the end, the drawer will come right out. By installing the new drawer in the same sequence, the job is completed. As for the filter, it is located inside the refrigerator compartment on the upper right side.Simply remove any items from the top shelf that may be in the way, and then push in on the tab that extends out from the filter housing. The filter and connector will swivel down at that point,simply hold the connector in one hand to stablize and with the other hand, twist the filter counter-clockwise to remove the filter. To reinstall the new filter, remove all protective covering from filter. Plase filter against filter connector and turn until tight (1/4-1/2 turn).Raise complete assemble upwads until tab snaps back into place. Installation is now complete, next purge the air out from water supply by placing a pitcher or other large container under the dispenser and activate.Run water for a minute or so until all air is removed.

Help other customers find the most helpful instructions.

Were these instructions helpful?

183 of 270 people found this instruction helpful

Parts Used

  • Ice and Water Filter

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerJake from Novato CA

Removing the existing filter by rotating as directed and then dislodging from 'docking' station proved difficult. Turns out, the old filter is under a bit of vacuum pressure and getting the unit to separate or release was a challenge.

I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate motions and a steady thought process on the problem helped disengage the darned old filter!

Help other customers find the most helpful instructions.

Were these instructions helpful?

121 of 196 people found this instruction helpful

Parts Used

  • Ice and Water Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMarilyn from Lilburn GA

Needed to change water filter in refrigerator

The switch-out of the water filter was simple with good instructions on the box.
The part was delivered very, very quickly!

Help other customers find the most helpful instructions.

Were these instructions helpful?

82 of 87 people found this instruction helpful

Parts Used

  • Ice and Water Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerKathryn from Cedar Springs MI

Water filter needed replacing

I unscrewed the old one and replaced it with the new one. The real benefit was I got the exact part I needed w/o a 30 minute drive and sales people that ignored me. I had gone to the local store the day before and come home with the wrong part because i could not get assistance and the part # I had did not match what was labled on the package. I used the same part # on the website and got exactly what was needed, less that 48 hrs after I ordered it. thanks for the prompt service. we will be a repeat customer

Help other customers find the most helpful instructions.

Were these instructions helpful?

80 of 146 people found this instruction helpful

Parts Used

  • Ice and Water Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customeralvin from irmo SC

Easy and quick

unscrewed to removed old and screwed in new

Help other customers find the most helpful instructions.

Were these instructions helpful?

18 of 26 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerDave from granite Bay CA

Front ice maker display flashing and ice maker door flapping open and closed

I firts pulled the refrigerator away from the wall. Un plugged it and removed a metal cover off of the back of the fridge. A clear plastic container was behind the metal pael. Removed the connectors and snapped the pld board out, Put in the new one and reinstalled the cover. Had to get the code number from theinside of the frifge and entered it into the front key pad. This step took a bit of figuring to advance the numbers using the key pad but with some trial and error...Repair done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

17 of 24 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerDiane from Glendale AZ

Center rail broke again

This is the 2nd time I had have had to replace the center rail in 2 years....

Help other customers find the most helpful instructions.

Were these instructions helpful?

14 of 16 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers, Wrench set

CustomerChristopher from Huntingdon Valley PA

Broken hinge on the pantry drawer and cover.

First I removed the drawers above the pantry drawer. Then I took out the pantry drawer. I unsrewed 3 screws that attached the part to the refreg. I then removed the rails that were attached to the part I was repalcing and put them on the new part. I then install the new part. Put the firg back together. It was extremely easy and took about 5 minutes to do.

Help other customers find the most helpful instructions.

Were these instructions helpful?

16 of 24 people found this instruction helpful

Parts Used

  • Ice and Water Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMarilynn from Holland MI

Needed to replace filter

Turned old one until it snapped out. Replaced it with a turn.

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 15 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerTy from Shepherdsville KY

Ice maker wouldn't work

First I removed the outer shell part then removed the 4 screws holding the ice bin together.After taking the parts out of the old ice bin it was easy to put all the new parts together except the new helix end cap which was a bit tricky to put it in place.It wasn't difficult to reassemble but I would stongly suggest taking notice how everything fits together before taking it apart.

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 16 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerJoe from Centreville VA

Broken bracket

Remove (3) screws; Removed existing bracket and installed new bracket.

Great Service from PartSelect

Help other customers find the most helpful instructions.

Were these instructions helpful?

10 of 13 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerkAREN from CHEVY CHASE MD

Small nub that holds pantry door had broken off

For replacing end cap, LH pantry part:
removed large pantry drawer
removed two small upper pantry drawers
removed glass panel and long braces---all these parts required no tools
used 1/4" nut driver to remove 3 screws from broken end cap, LH pantry part and shook it to release it from the refrigerator
used phillips head screw driver to remove drawer arms
replaced metal drawer arms to new end cap, LH pantry part
attached new end cap, LH panrty part to refigerator and finised by using nut driver on all 3 screws. then replaced other pantry dawers, glass shelf, and pantry cover. EASY!

Help other customers find the most helpful instructions.

Were these instructions helpful?

10 of 15 people found this instruction helpful

Parts Used

  • Ice and Water Filter

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerMichael from Long Valley NJ

Six months in use time to replace the filter

It is simple, unscrew the old screw in the new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 33