2326380-1-S-Whirlpool-UKF8001-Ice and Water Filter
2326380-1-S-Whirlpool-UKF8001-Ice and Water Filter 2326380-2-S-Whirlpool-UKF8001-Ice and Water Filter

Ice and Water Filter

PartSelect Number PS2326380

This part has a high-quality carbon filter that reduces contaminants. Replace the filter annually or when the filter light is on. Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Water dispenser will not dispense water.
  • Ice maker will not make ice.
  • Leaking water.
  • Unusual Noise.
  • Fridge section too cold.
  • Ice maker dispenses too little ice.
  • Touchpad does not respond.
  • Compare At

    $59.38
  • You Save

    $9.90
  • Your Price

    $49.48
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 33 reviews What's this?
 

7 of 14 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerKristen from Corinth TX

Needed some replacement parts

My parts were very easilyinstalled - a water filter and the grill/tray to the water dispenser. No tools were required! I will definitely use PartSelect again - the reference drawings made it very easy to be sure I was ordering the correct parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 7 people found this instruction helpful

Parts Used

  • Ice and Water Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerBrenda from Spokane Valley WA

Replace water filter

pop open, unscrew quarter turn, screw new one in quarter turn, pop shut. duh

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Ice and Water Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customerlaurie from gold canyon AZ

This is almost embarassing but you asked....

Once the part arrived, which was very quickly BTW..all I had to do was remove the old filter and then just screw the new one into place....Now I just happen to be both female and blonde but was able to get the job done in less than 15 minutes (that includes opening the box) and with very little water dripping from the old filter!!! Looks like I could work as the Maytag repair woman soon!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 5 people found this instruction helpful

Parts Used

  • Ice and Water Filter

Level of DifficultyA Bit Difficult

Time to do repair:Less than 15 mins

Tools

CustomerJames from Whittier CA

Replace ice & water filter

Open and remove lower cover on filter holder by opening tabs that hold lower cover and remove lower cover.

Firmly hold back of unit and firmly hold and turn filter in counter clockwise to unlock and remove.

Install new filter by holdin back of unit and install new filter by turning in clock wise direction and then replace lower cover.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerjohn from Ramona CA

Bottom drawer pin was broken

Replaced the left side endcap for the drawer. Three screws and it popped out. Easy process once I actually looked at it. Drawer cover now works as designed. Replaced inline water filter. Not problem there.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 4 people found this instruction helpful

Parts Used

  • Ice and Water Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customerwilliam from andover MA

Ice maker not working

I first replaced the water valve but the ice maker still didn't work. I then replaced the water filter it is was fine. I would recommend always changing the filter when you change the water valve.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Ice and Water Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerEric from Noank CT

Replacing filter

Really easy, simple instructions, and it was on my doorstep 3 days after I ordered. Much simpler than dealing with the appliance store, where I'd have to drive to the store, order the filter, wait 7-10 days, and return to pick it up. Ughh! Internet is the way to go!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 4 people found this instruction helpful

Parts Used

  • Ice and Water Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerALICE from SPRING HILL FL

Filter needed to be changed

followthe instructions in the book that came with the refrigerator

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerRafe from Tuscola TX

Ice maker stopped making ice.

I turned off the water supply to the refrigerator, and I removed all the food, baskets, and shelving from the freezer unit. I removed three screws holding the ice maker, lowered it, and unplugged the wiring harness. The clip holding the wiring harness in the ice maker was not real obvious, but I found it okay. I took the bail and the front cover from the old ice maker and placed them on the new ice maker. Two of the screw holes for the new ice maker were slotted allowing me to start the screws in the side of the freezer prior to installing the new ice maker, and the third screw was no trouble to start. I really did not need the instructions I ordered, but I am cautious toward having everything I need in case something does not go as planned. This was a very easy repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Ice and Water Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerCharles from Newaygo MI

No problem

took old one out installed new turn left out turn right in

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 4 people found this instruction helpful

Parts Used

  • Ice and Water Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerElizabeth from Greencastle IN

It was time to change the filter for the first time

Opened up the door that covered the filter, unscrewed it and put the new one in and closed the door back up.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerKathleen from Salem MA

The large "pan" (I'd call it a drawer) broke on my amana refrigerator...apparantly a common problem with this refrige.

After going to the Amana website and not finding my refrigerator even listed there (it is less than 6 years old) I emailed them, but decided to do my own search and found this website. Ordering the part was easy and was delivered within the week.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 4 people found this instruction helpful

Parts Used

  • Ice and Water Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMarlene from Baltimore MD

Indicator light showed water filter needed to be replace

Dropped down the housing for the water filter, twisted, removed item and slotted in the new filter. Easy as pie.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

  • Ice and Water Filter

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerDebbie from Bluffton SC

The filter was clogged.

Replaced filter and the water started to flow like the Nile River and the ice maker came back to life.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

Customermichael from boca raton FL

Entire freezer compartment was cascaded in ice and icemaker had been noisy

Turn off power first or unplug. Get a light so you can see. Read these directions through one time to reduce the learning curve. Remove ice cube bin. 1/4" nut-driver will do most of the work. Remove flexible water fill tube from back of ice cube maker, move to the side, out of the way. Remove screw from "L" shaped bracket from the bottom of maker, close to the front. Two more 1/4" screws to go. There are (2) screws on the top left that hold the maker to wall. Loosen the front screw, but do not totally remove, unit will lift off of front screw. The back screw had to be completely removed because of a clip that holds the wiring on the back of the maker. The wiring is attached to the back wall in the form of what is called a Molex connector, a white plastic connector. This is probably the hardest part of the job, wiring access. The air deflector blocks any free access, so you have to just grab and depress the prongs to release the Molex from the wall. With wiring disconnected, remove entire assembly. Use a flat-tip screwdriver to pop the white cover off of the front of the maker to use on the new one. Same goes for the wire cube arm that sets out over the ice cube bin, taking the front out first (pulling straightout) then pivot arm 180 degrees and remove from back. Remove wiring harness from front of maker. Re-install on maker, it goes in one direction only, look at the configuration before you pull it out, and put in the same way. Make absolutely sure you re-install it so it clicks in all the way. If not, it won't work. I had to remove the ice maker again because I did not make this connection properly the first time. So I did the whole job twice. You have to put the job back in reverse of the way you took it out. The new one works great. I should have done this about a year ago. The old one had been making a noise and I ignored it.

Help other customers find the most helpful instructions.

Were these instructions helpful?