| |
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerWilliam from Brentwood TN
It was time to change the water filter.
All work was done by hand. I removed the cover plate, unscrewed the existing water filter and screwed in the new one. I returned the cover plate to its original position and bled the air out of the line by running the water dispenser for a few minutes. It could no have been easier.
|
2 of 5 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerChad from Pleasanton CA
Filter needed to be replaced in the fridge
Located the filter, removed the filter, installed the new one, reset the filter light on the front of the water discharge, and all is good.
|
1 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver
Customerrobert from Milton MA
Heater element in ice maker burnt out
This is a very simple repair.Unplug the appliance first because you're dealing with an electrical connection to the ice maker.Remove ice holder by lifting up on the tray.This exposes the ice maker.Remove hex head screw that holds ice maker to side of unit(the empty end of an all in screw driver is the exact size.Then lift up on the ice maker and pull away from the wall of unit.Unplug both ends of supply harness by squeezing the side of the plug ends.Remove the metal bale from old unit and reinstall the wiring harness and bale on the new unit.If you've gotten this far the new installation is a breeze.Plug in new unit and reattach to wall.Ice will start making in about an hour or two.
|
1 of 3 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsScrew drivers
CustomerMichael from Chesterfield VA
Freezer cold, refrigerator not cooling
First I removed the top shelf and its contents to allow for more room. Then I removed the plastic temperature control housing by tugging housing forward and releasing it from the two clips located at the upper rear corners of the fridge. Then pull down. Then I removed the three screws holding the entire temperature control assembly and dropped it down to access and remove defrost assy. Installed new defrost assy. and re-assemble in reverse. Change light bulbs before replacing final housing. Also, a good time to clean housing interior before re-installing.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerPandora from North Ridgeville OH
Water filter replacement
Just a filter replacement -- however more impressed with the speed of which I could receive the replacement.
Can't find them anywhere local -- glad I found Part Perfect!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerVirginia from Belfast ME
Water filter expired
My husband did the replacement of the filter, so it was really easy for me. Easy for him too! The best part was this company had the best price, and the part was here in no time!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerAl from Rio Rancho NM
Filter was one year old and needed to be replaced
Open refridgerator door, remove old filter by hand in a counterclockwise direction. Insert new filter turning clockwise. Close refridgerator door and fill a glass with water from dispenser. This will remove air and ensure water to free flow. Check for leaks.
|
1 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMarilyn from Rancho Mirage CA
Annual replacement
have always done it myself, but Maytag store closed, so I didn't know where to purchase filter
I received it from Parts Select, in 2 days and if I remember right, price was cheaper than I paid last year, at store.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver
CustomerJim from Lancaster CA
Thawing element had failed
Followed the video instructions provided by the seller .
THANKS , VERY HELPFUL !!!!
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerPatrick from Davis Junction IL
Unclean water problem
Removed old filter with a twist and installed new filter the same way. Very simple task.
|
0 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerKurt from New Braunfels TX
|
0 of 4 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
Tools
CustomerJeffrey from Westfield NJ
Changed water filter for water/ice despenser
Needed to replace water filter. Part arrived very quickly and was cheaper than nearby stores. I replaced old one within minutes. I also purchased air conditioner knob that other local places said were very difficult for them to locate. I am very pleased with the service, selection and the ease at selecting the correct parts.
|
18 of 616 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers, Socket set
CustomerLynn from Covina CA
Replaced the limit switch on the door that regulates when the ice is suppose to come out
took off the faceplate on the door and replaced the limit switch. It was really easy to get to. Simple Job
Parts Select was really easy to deal with the parts came really really fast. Had my machine fixed in no time. Thanks Parts select.
|