Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS232632
NOTE: Terminal block is NOT included.
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
The cause of the problem was that I had installed a generic replacement recepticle earlier. Parts Select had the correct part. It came with handy wire nuts to help connect to range wires to the recepticle wires.
Help other customers find the most helpful instructions.
Were these instructions helpful?
removed receptacle screwcut wiresinstalled new receptacle with wire nutsinstalledworked great
First, I used the PatrSelect website, which has great prices, and has helpful diagrams. Once I had all the parts, I worked with my wife to turn off the power at our home junction box. Next, I lifted off the cover over the control area of this range. I removed four nuts to lift out the panel that holds the four controls and the fan switch. I removed the wires from the broken controls, removed the two screws holding each control in place, then screwed the new ones in place. I would recommend trimming the posts on the controls to the correct size before screwing them in place, because it is easier to grip them and not bend them when they are not mounted. I reconnected the wires and replaced the panel. For the "receptacle", I followed the instructions provided regarding cutting the wire and placing the wire nut and heat shrink tubing. I opened the unit that houses the burners to get easy access.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.