Quick Question!

Have you ever purchased from PartSelect.com before?

232404-1-S-GE-WB16K10026        -Double Burner Assembly
232404-1-S-GE-WB16K10026        -Double Burner Assembly 232404-2-S-GE-WB16K10026        -Double Burner Assembly 232404-3-S-GE-WB16K10026        -Double Burner Assembly http://www.partselect.com/Schematics/GE/00125340i01.gif

Double Burner Assembly

PartSelect Number PS232404

Both burners are mounted on the same bracket.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Gas igniter glows, but will not light.
  • Will Not Start.
  • Element will not heat.

Compare At

$46.54

You Save

$7.76

Your Price

$38.78
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 22 reviews What's this?
16-22 of 22
 

1 of 3 people found this instruction helpful

Parts Used:
  • Double Burner Assembly
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: David from Warwick, RI

Broken part

The key here was that I found the correcd part for an older kenmore oven and it was easily installed

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
  • Double Burner Assembly
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Brenda from Franklin, NC

One of the stove top burners had burned all the way through

matched part needed on web site; took off burner; ordered part; received it on the third day and easily replaced it. Wonderful, easy, and very short delivery time! Thanks.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
  • Double Burner Assembly
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: clare from north brunswick, NJ

Old burner assembly could no longer be cleaned

pop up range top. pull off old burner. put on new one.
close top. check for rocking. install leveling washer. check again. 2nd burner didn't require leveling so it was quicker.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
  • Double Burner Assembly
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Judy from Payson, AZ

Burners were not burning properly

Just removed the old and set in the new. Waalaa. All is well now. The web site, ordering, shipping and all was super easy.
Thank you

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
  • Double Burner Assembly
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Larry from Forestville, CA

The double burner assembly had years of gunk so the burn was not clean.

The old double burners lifted off. Before the new burner could be set down into place, the area had to be completely cleaned using a flat blade screwdriver and damp rag. This allowed the new burners to seat properly in place. That is it.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 3 people found this instruction helpful

Parts Used:
  • Double Burner Assembly
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: Alphonse from Glendale, AZ

We had to buy two dubble burner assemblies because one burner was out on each old assembley

The burner assembly was for my wifes daughter. She raised the top of the stove removed the old burners and set the new ones in place she also used the set washer and it works just fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 3 people found this instruction helpful

Parts Used:
  • Double Burner Assembly
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: albert from La Veta, CO

Back burner not working

Lift stove top, rest it on the pop out holders on stove.
Take old double burner out, Make sure gas port is not plugged.
Put new burner in its place. Make sure it is solid, if not use the washers sent with new burner. turn on gas to burner, to see if it works. Close stove top an wa la!
The bride is happy.;-]

Help other customers find the most helpful instructions.

Were these instructions helpful?   

16-22 of 22