232404-1-S-GE-WB16K10026        -Double Burner Assembly
232404-1-S-GE-WB16K10026        -Double Burner Assembly 232404-2-S-GE-WB16K10026        -Double Burner Assembly 232404-3-S-GE-WB16K10026        -Double Burner Assembly http://www.partselect.com/Schematics/GE/GE_Thumb/00125340i01.gif

Double Burner Assembly

PartSelect Number PS232404

Both burners are mounted on the same bracket.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Gas igniter glows, but will not light.
  • Will Not Start.
  • Element will not heat.
  • Compare At

    $44.12
  • You Save

    $7.35
  • Your Price

    $36.77
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 21 reviews What's this?
1-5 of 21
 

17 of 20 people found this instruction helpful

Parts Used

  • Double Burner Assembly

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerHelen from Flemington, NJ

My old burners were beyond the point of coming clean and made my stove top look bad.

My husband and I simply took the burner units out of the packing, took the old ones off, put the new ones in. The new units needed to be leveled, but the leveling nuts included fit perfectly, and the entire repair took less than 15 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 10 people found this instruction helpful

Parts Used

  • Double Burner Assembly

Level of DifficultyEasy

Time to do repair:15 - 30 mins

Tools

CustomerANNE from HICKSVILLE, NY

Burners were burning the pans and flames coming out at all different angles of the burner

The toughest part of the repair was the preparation to remove the old burners. As a result of the burning there was a carbon residue on the burners, on the gas outlet feed to the burners. This took some scrubbing and removing the carbon residue. Bits had burned onto the outlet and had to be scrapped off. Once all cleaned, replacing the burners was easy just had to place the balancing nuts in place and put on the burners. One problem arose the hood of the stove did not go back in place after replacing the burners so I then removed the balancing nuts put back on the burners stove top hood fit back in place and burners operated properly. This part of the repair took five minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 6 people found this instruction helpful

Parts Used

  • Double Burner Assembly

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerDebbie from Santa Clara, CA

Burners very old / needed to replace

Very easy! Open the top of the stove, remove the old double burner and place the new one! Anyone can do it! It's that easy... :)

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 16 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsWrench (Adjustable)

CustomerCallie from Bay, AR

Two of the burners were not working at all, the other two were blackening pots and pans

I turned off the gas flow to the appliance, removed the old oriface spuds with the adjustable wrench, inserted the new oriface spuds and tightened them with the adjustable wrench. The double burner assembly just dropped on. They fit perfectly. I did not have to use the leveling nuts that were included with the burners. The old levelers were still in place and set perfectly for the new burners. Very easy repair, and the range works like a new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

  • Double Burner Assembly

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerRichard from San Diego, CA

Burners could no longer be cleaned.

Lifted the top and dropped in the new burners. Realized they always should have had the leveling washers provided so I took the burners off, dropped on the leveling washers and dropped the burners back on. This all took about 2 minutes. Really made the range top look a lot nicer.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 21