232404-1-M-GE-WB16K10026-Double-Burner-Assembly.jpg
232404-1-S-GE-WB16K10026-Double-Burner-Assembly.jpg 232404-2-S-GE-WB16K10026-Double-Burner-Assembly.jpg 232404-3-S-GE-WB16K10026-Double-Burner-Assembly.jpg

Double Burner Assembly

PartSelect Number PS232404

Both burners are mounted on the same bracket.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Gas igniter glows but will not light.
  • Will not start.
  • Cooktop element not heating.
  • Compare At

    $41.81
  • You Save

    $6.97
  • Your Price

    $34.84
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 21 reviews What's this?
1-15 of 21
 

13 of 15 people found this instruction helpful

Parts Used

  • Double Burner Assembly

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerHelen from Flemington NJ

My old burners were beyond the point of coming clean and made my stove top look bad.

My husband and I simply took the burner units out of the packing, took the old ones off, put the new ones in. The new units needed to be leveled, but the leveling nuts included fit perfectly, and the entire repair took less than 15 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 7 people found this instruction helpful

Parts Used

  • Double Burner Assembly

Level of DifficultyEasy

Time to do repair:15 - 30 mins

Tools

CustomerANNE from HICKSVILLE NY

Burners were burning the pans and flames coming out at all different angles of the burner

The toughest part of the repair was the preparation to remove the old burners. As a result of the burning there was a carbon residue on the burners, on the gas outlet feed to the burners. This took some scrubbing and removing the carbon residue. Bits had burned onto the outlet and had to be scrapped off. Once all cleaned, replacing the burners was easy just had to place the balancing nuts in place and put on the burners. One problem arose the hood of the stove did not go back in place after replacing the burners so I then removed the balancing nuts put back on the burners stove top hood fit back in place and burners operated properly. This part of the repair took five minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 5 people found this instruction helpful

Parts Used

  • Double Burner Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDebbie from Santa Clara CA

Burners very old / needed to replace

Very easy! Open the top of the stove, remove the old double burner and place the new one! Anyone can do it! It's that easy... :)

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 10 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsWrench(Adjustable)

CustomerCallie from Bay AR

Two of the burners were not working at all, the other two were blackening pots and pans

I turned off the gas flow to the appliance, removed the old oriface spuds with the adjustable wrench, inserted the new oriface spuds and tightened them with the adjustable wrench. The double burner assembly just dropped on. They fit perfectly. I did not have to use the leveling nuts that were included with the burners. The old levelers were still in place and set perfectly for the new burners. Very easy repair, and the range works like a new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 7 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

Tools

CustomerThomas from Traverse City MI

The burner assembly seemed to be rusting some and had become not easy to clean. The grates had just become dirty and unable to clean so they were changed out for ascethetic reasons only.

I ordered the parts on line and they came very quickly through the mail. The burner assembly came with instructions for the installation of a nut. Everything was great - from the order to the delivery to the installation.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Double Burner Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRichard from San Diego CA

Burners could no longer be cleaned.

Lifted the top and dropped in the new burners. Realized they always should have had the leveling washers provided so I took the burners off, dropped on the leveling washers and dropped the burners back on. This all took about 2 minutes. Really made the range top look a lot nicer.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Double Burner Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDebbie from Giddings TX

Burner was old and needed replacing

Took it out of the box, lifted the stove lid and replaced the part, no tools required. Very satisfied with the shipping and the part, great service. Thanks!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Double Burner Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerCarlos from Miami FL

Cracks in the bruner due to corrosion

I bought a new Doble Burner assembly and replaced the old ones.
Piece of cake.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Double Burner Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDoan from Flushing NY

Burner did not light

just lift the cover and put it on.less than 1 minute.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Double Burner Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customerclare from north brunswick NJ

Old burner assembly could no longer be cleaned

pop up range top. pull off old burner. put on new one.
close top. check for rocking. install leveling washer. check again. 2nd burner didn't require leveling so it was quicker.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

  • Double Burner Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerHyojin from Monmouth Junction NJ

The pipe that carry the gas to the ignition part was damaged, therefore the burner was not lightening up.

Just have to remove the old kit and replace it with the new one. No tool required.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Double Burner Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerHeather from Wauconda WA

Burners were plugged

We bought our replacement burners from Part Select.com at half the price of another major appliance store. They came fast & fit perfect. All around, we are very happy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Double Burner Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDavid from Warwick RI

Broken part

The key here was that I found the correcd part for an older kenmore oven and it was easily installed

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Double Burner Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerTara from Bronx NY

Rusted & dirty burners

I moved to an apartment where the past tenants did NOT take care of the stove. I think this stove is 10+ years old and looks like it was NEVER cleaned in all of its existance! I cleaned everything really well with oven cleaner and lots of scrubbing. The stove looked brand new EXCEPT the burners! I couldn't take it anymore so I ordered new ones. The burners came in less time than stated. I opened the box, took the burners out, lifted the oven hood and just placed them right where the others were. There are no tools needed it pretty much just gets placed down in the appropriate spot and that's that! No directions or tools needed. My stove looks awesome now!! When you first use the burners, you will probably need to place a match or lighter by the burner to get the fire going. After that, it lights perfectly every time.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Double Burner Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerBrenda from Franklin NC

One of the stove top burners had burned all the way through

matched part needed on web site; took off burner; ordered part; received it on the third day and easily replaced it. Wonderful, easy, and very short delivery time! Thanks.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 21