See part 820 in the diagram

Icemaker Assembly - 7 Cube

PartSelect Number PS2323279

Icemaker kit - electronic. Includes 4 pin round plug-in connector, 6 post plug-in connector, fill cup and tube.

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

  • You Save

  • Your Price

In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.8 / 5.0, 1 reviews What's this?
1-1 of 1

8 of 21 people found this instruction helpful

Parts Used

  • Icemaker Assembly - 7 Cube

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerCharles from Elizabethtown KY

Ice maker quit working

Looked up possible causes on the internet, did the trouble shooting: off wait 15 seconds, then on, hit the ice level switch 3 times. No cycling - order a new ice maker. Had already checked water supply line and water filter. Screws in difficult positions to use standard screwdrivers or if you have medium size hands to remove plastic guards. After that was easy to replace whole unit. Cut plastic guards to be able to get at mounting screws for next time. Designers definitely need to think about consumer repairing of items rather than disposable major items not built to last 10+ years.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-1 of 1