Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS232263
This part works with the following brands: GE, Hotpoint & Kenmore.
Handle only. Screws are not included.
I had to remove the two screws that were still in place from the broken door handle. Once they were removed I placed the new handle on the microwave and screwed the new handle in place. A total of less than 10 minutes!!!
Help other customers find the most helpful instructions.
Were these instructions helpful?
Removed the two screws holding the origional handle to the door. Attached new handle with same two screws. Job completed.
removed the 2 existing screws, aligned handle with holes, tightened screws.....done
There were globs of glue where handle was attached. Glue was brittle and chipped off rather easily. Ordered the new handle which arrived as the exact one needed and in 3 days with the lower cost shipping charge. The screws do not come with the handle but the old screws were still in the door and were removed easily with some needle nose pliers. Cleaned off appliance door and attached new handle in about 5 minutes or less. Used no new glue. A very easy repair.
The repair was very simple. All we did was take two screws out and replace the handle and screw the new handle back on. That's it!!! I thought the part was expensive but considering replacing the microwave it was well worth it!!
I went to use our microwave the Thursday before Christmas and the handle broke right off in my hand. I had to get to work and i did not tell my wife. By ten o'clock she called me and said the handle broke off when she used the microwave. I said I would try to find one and I did at PartSelect.The shipping I chose said 3 to 5 days.I placed the order about 2:30 that afternoon.The next day my wife called and said the handle had arrived and she put it on herself. Thanks for your prompt service, Allan Carignan
Opened microwave door,removed top and bottom screws (phillips), discarded old handle, put new handle in place, installed top and bottom screws in new handle, closed microwave door. Hard part was discarding the old handle because it required pulling out the trash can drawer(ha-ha).
Removed two screws and installed the new handle. The broken handle was no big deal.
Piece of handle was still wrapped around the screw..took a little while to get the old part off only took about 2 minutes to install the new part...it was a perfect match and fit perfectly.
Removed a top and bottom screw. Pulled off the broken handle, put on the new handle, replace the 2 screws and about 60 seconds later, the repair was complete. Parts select seems to always have what parts I need and thats terrific.
I went on the PartSelect page and found the model # for my microwave and ordered the handle. I thought I was going to have to wait for several weeks but it arrived in three days. The only glitch was that the plastic end of the broken handle was still attached to the screw and I couldn't get a grip on it in order to remove the screw...so I tried several different things... ultimately using a corkscrew to pierce the old piece of plastic handle thus allowing me to remove the screw and in two minutes I was able to replace the handle. I can't believe it was that easy. Thank you.
I first removed the broken door handle by removing two screws and replacing it with the new handle.The new handle was the exact size of the old handle,the holes lined-up perfect.I ordered the handle on thurs. and expected to get it the next week. I got the part Sat.
had to use pliers to grab a nub of the plastic screw female that had broken off. Other than that, went easy. This is a product defect and not only should the part be free, but there should be a free retrofit repair.Your part was here quickly and perfect. Great job, thank you.
Removed remainder of door handle by unscrewing top and bottom. Screws were still intact and easy to remove. Replaced with new handle. Very simple. Ordering was easy and precise. Part received within 3 days. Schematic provided at website provided detailed information to ensure proper ordering.
Unscrew old screws at the back of the microwave door and replace the old handle for the new one.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.