| |
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
Tools
CustomerKen from Alhambra CA
Door handle brke - common occurrence for this type microwave
I easily removed gasket that retains microwave door glass just tilkl I had visibility of bottom screw and un screwed the non-visible screw and screwed bottom portion of handle and tightened both top and bottom screws, applied gasket back and completed job in less than 5 minutes.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerMichelle from Long Beach CA
Plastic door handle split apart
I read the instructions posted by others. Removed the visible screw from the inside of the door at the top, pulled the door gasket covering exposing the bottom screw. I reattached the new handle. Viola. Thank you.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerAlyson from Sault Sainte Marie MI
The handle of my microwave broke at the bottom end where it attaches to the door
Thanks to your website, the repair was very easy. The handle was attached by 2 screws- 1 on the inside of the door at the top outer edge and the other screw is under the white rubber that goes around the glass of the window. I pried the rubber out enough to get at the screw and once the new handle was in place the rubber snapped in very easily.
Thanks for the very quick service and reasonable price.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerF Darrell from Trinity FL
The handle was broken at the bottom.
Removed the screw holding the handle at the top. Pried up the seal around the glass to expose the srew at the bottom. Removed it. Placed the new handle in place, attached it with the two screws, snapped the seal back in place. DONE
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerRobert from Lake Wales FL
Microwave handle broke...plastic cracked
I removed the screw at the top that was exposed, but I couldn't figure out how to get to the second screw that was obviously holding the bottom of the handle in place. After a few minutes, I discovered that a plastic grommet on the inside of the microwave door was removable and allowed me access to the second screw. Once it was removed, putting the new handle in place was easy!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
Customergary from Park City UT
Broken door handle on built in microwave
The repair hint on prying out the inner seal on the door for access to the second door mounting screw made the repair easy. Total time to replace the handle less then two minutes.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerStaci from Nine Mile Falls WA
Handle broke off
The repair was so easy. I removed the one remaining screw, pulled out the rubber gasket, screwed in the new handle, replaced the gasket around the window and that's it. I swear it took less than 10 minutes.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
Customershaun from Sterling VA
Microwave oven handle broke when the door was opened...
Took a while to get around to ordering the part, which was beginning to drive my wife crazy, so I ordered the part without saying a word. The handle arrived within two days and I had the part installed within 10 minutes of opening the package, it was really easy. So, I had to trick her into opening the oven and it completely surprised her that it was done so quickly without her knowing a thing about it. Great service, thanks!
|
1 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerLarry from Ocean Springs MS
Door handle broken
removed gasket inside door, removed 2 screws, pulled handle off, put new handle in place, put the 2 screws back onto handle, replaced gasket. finished.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerWilliam from Conyers GA
Handle broke where attached at bottom screw.
Two screws had to be removed. One exposed, the other was underneath the plastic band. Use a butter knife or thin flathead screwdriver to remove plastic band. Remove both screws and replace broken handle with new handle. Re-attach the plastic band. this very easy. My suggestion to eliminate breaking this handle at the bottom, is to grip this handle firmly at the top, when opening the microwave door.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerErik from Manhattan Beach CA
Replaced outer door frame and handle
1) OPENED THE DOOR AND REMOVED INNER FACE FRAME.
REMOVED THE TWO SCREWS FOR HANDLE,
SLID OUT THE END SLID OUT THE GLASS.
SNAPPED THE PARTS INPLACE RE-INSTALLED THE GLASS, SCREWED IN NEW HANDLE AND DONE!
EASY DEAL!
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerDan S from Morgantown WV
Plastic door handle broke off at bottom attachment
Other descriptions accurately describe how to replace the handle.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerHolly from Eden Prairie MN
Handle broke on microwave door
unscrewed the screws on the inside of the door. Handle came off and put new one on.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerKenneth from Crossville TN
Broken door handle
very simple just removed the plastic around the inside of the door remove 2 screws remove old handle install new handle replace the 2 screws and the plastic around the inside of the door
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerWalter from New smyrna Beach FL
Door handle broke.
Because of a previous repair story about the ease of repair of a broken door handle, I ordered the part and repaired it my self, saving the repair charge
|