| |
3 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerBarbara from San Diego CA
Door handle broke at one end
First I removed the two scews holding the handle in place. I then pulled the hand off and replaced it with the new one. Done
|
2 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
Customerraymond from east hampton CT
Broken door handle on microwave.
Unscrewed the two screws that held the handle in place. Discarded the broken handle, attached the new handle by the same two screws.
|
2 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerW from Kentwood MI
Handle broke at one end
removed screws - took old handle off - put new handle on - screwed into place. DONE!
|
2 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerRobert from Wood Ridge NJ
Broken handle
Removed 2 philips screws from handle...removed same..instaled new and reinstalled screws.
TA DAA Oven hinge a little more difficult.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerCarl F from King of Prussia PA
Broken handle
Loosen two screws and remove handle. Insert new handle and tighten two screws. Job done in five minutes.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerPaul from Whitehall MI
Broken door handle
I HADE TO TAKE OFF TWO SCREWS FROM INSIDE THE MICROWAVE DOOR REMOVE THE OLD DOOR HANDLE AND SIMPLY PUT THE NEW DOOR HANDLE IN PLACE AND SCREW THE TWO SCREWS BACK IN ALL THIS TOOK LESS THAN 5 mins.
|