| |
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers, Wrench set
CustomerKristin from Elkhart IN
We first noticed the oven took an excessive amount of time to reach the desired temperature. Finally, one small part of the bake element turned bright red, almost like it was on fire, and then it broke apart at that spot.
After reading other customers' experiences, I removed the screws holding the element in place and pulled it out a few inches in order to disconnect the wires. I then attached the new element and replaced the screws. It was much easier than I expected.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerMartin from Indianapolis IN
Broken handle
Removed the 2 screws then the handle and then replaced the handle with the new one and placed the screws. Very easy and did not take much time!!!!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerLori from Lakewood CO
Door handle broke off
Simply removed the screws from the broken handle and screwed on the new one. For under $40 my microwave is back to perfect. And I thought for sure I'd have to buy a new onel That would have been a waste of money, and since I'm all about not throughing away perfectly good items it's good for the environment too.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerGrace from Panama City FL
Our microwave handle broke off .
The picture on your site was very helpful. We couldn't find our manual and were not sure of a part number.
We got it in a few days and removed the screws from the old handle and put the new one on in 10 minutes or less.
Since it is a built in microwave you saved us the expense of purchasing a new one and the time involved to put it in.Thank you
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerNadine from St. Louis MO
Handle to the microwave broke off from the bottom
I removed the original handle by removing the two screws . Then I attached the new part using the same screws.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerArthur from Lincoln MA
Original handle broke at the bottom fasten point
I unscrewed the remaining stubs and replaced the handle. Unfortunately, despite care, I was unable to tighten the top screw sufficient to seat the handle securely against the door. I fear the new handle will fracture.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJeff from Glenview IL
Door handle broke at bottom screw
Removed 2 screws, lifted handle off the door, fitted the new handle in place and replaced the screws (don't lose the screws...none are provided with the new handle).
|