232251-1-S-GE-WB15X321          -Door Handle
232251-1-S-GE-WB15X321          -Door Handle 232251-2-S-GE-WB15X321          -Door Handle 232251-3-S-GE-WB15X321          -Door Handle

Door Handle

PartSelect Number PS232251

The screws are sold separately.

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $113.02
  • You Save

    $18.84
  • Your Price

    $94.18
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Door Handle

Part Number 232252

This white door handle does not come with screws. You can use the existing ones or order new.

$96.32
In Stock

Door Handle

Part Number 232256

This handle is almond. Screws are NOT included.

$55.52
In Stock

Single Tapping Screw

Part Number 234637

$5.55
No Longer Available

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 37 reviews What's this?
1-15 of 37
 

458 of 459 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerMary-Ann De Lancey from Keene NH

The handle broke.

One screw would not come out cleanly as the plastic housing from the broken handle had to fished out of the hole. Using pliers to assist with that, once the old plastic was removed, the new part inserted into the hole and using the same screws, I attached the new handle in probably less than 5 minutes. I was extremely pleased that the new handle arrived in much less time than I thought it would...3 days from time of order to install!

Help other customers find the most helpful instructions.

Were these instructions helpful?

440 of 518 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerRay from Sugar Land TX

The handle came off. The door handle screws broke

Easy replacement.!I used the tip of the screw driver to remove all the broken parts from the microwave. Cleaned the screw path and screwed the nuts into the handle.

Help other customers find the most helpful instructions.

Were these instructions helpful?

140 of 201 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerRoy from Arlington TX

Broken handle

My wife broke the handle on the microwave and asked me to glue it back on. I refused to do such a tacky thing. So I got online and found your site,ordered the part and got it in about 5 days. I fixed it in less than 15 mins. If not for you site I would have a really ugly microwave right now.

Help other customers find the most helpful instructions.

Were these instructions helpful?

153 of 293 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerPatricia from Bloomfield CT

Door handle broke off microwave

Removed 2 old screws and replace with new handle and screwed it on!

Help other customers find the most helpful instructions.

Were these instructions helpful?

146 of 286 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerPatrick from Houston TX

Handle broke off while trying to open microwave

Opened microwave and removed screws to the door handle from the inside face of the microwave oven door. Once the screws were removed, I removed the broken handle pieces, placed the new handle in the existing holes, and reattached the handle using the original screws. All this was done in under 5 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

144 of 283 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerOwanna from Sherman TX

Handle of microwave was broken

Before ordering the new handle, I tried super glue which did not solve the problem. I used my cordless drill to remove some super glue so the handle would slip right into place. I then used the screw driver to secure the handle.

Help other customers find the most helpful instructions.

Were these instructions helpful?

146 of 293 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerAlyssa from Nottingham MD

Threads stripped in the handle and the light bulbs burnt out

HANDLE:
1. Removed the 2 screws that used to hold the old handle.
2. Reattached the 2 screws to the new handle.

LIGHT BULBS:
1. Removed the screws that hold the light cover in place.
2. Replaced the bulbs.
3. Screwed the cover back in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJames from Richboro PA

Broken handle

Removed the screw from the broken piece. Put the new handle in the proper location and screw it tight to the door. It is like new now and my wife is very happy to have it ready for the holidays.

Jim Maholic

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerBenny from Venice FL

Broiler element

The repair was very simple i just removed the plug from outlet and removed the 4 screws in oven and the 3 on back of stove then unpluged the 2 wires on element and then removed element from oven and then reversed process and then was back to broiling supper only took 10-15 mins tops.The service and customer service were a great help had part and was shiped and was back inservice in less than 2 days. Door handle was replaced within above time the removed 2 screws, and then installed new handle. Thanks Benny

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerGerald from Grand Island NE

The place where a screw secures the lower portion of the handle, failed.

Removed the two screws (top and bottom) from the interior of the door which allowed the handle to be removed. Positioned the new handle and secured it with the two screws that were used previously

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJon from Pittsburgh PA

Plastic handle cracked near bottom.

Two screws. Too easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerMargaret from Springfield IL

The plastic door handle broke and my husband glued it back on

When the handle broke again, I had to remove the old glue. That part was the most difficult. After that, it was a snap to install the new part. I was a little afraid that I may have ordered the wrong part but there was a 30 day return policy so I went ahead and ordered it. My son was so proud that I had fixed it myself!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerdawn from yardley PA

Our door handle broke off on our microwave

I ordered the part and received it within 2 days, despite my expectations of one week. My husband undid the screws, attached the new handle and screwed it in. It was that simple! And to think that I was ready to phone an appliance repair man!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMATTHEW from SAN RAMON CA

Broken door handle needed to be replaced

The door handle on the microwave had broken at the bottom fastener, and several glue repair attempts had proved futile over time. After removing the existing handle, I needed to bore the existing hole a little, to remove glue and plastic remnants. So I used a 5/16" drill bit and bored the hole to a depth of about 1/8." Once this was done, I used the existing fasteners and attached the new door handle. No movement in the handle when the door is pulled.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerLUIS from MIRAMAR FL

The handle threaded part broke from the handle

Replaced the handle with a new one with only two screws.
At least the original lasted 15 years

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 37