2322454-1-S-GE-WH12X10378-Pressure Switch
2322454-1-S-GE-WH12X10378-Pressure Switch 2322454-2-S-GE-WH12X10378-Pressure Switch 2322454-3-S-GE-WH12X10378-Pressure Switch

Pressure Switch

PartSelect Number PS2322454

This part is able to sense the water level in the tub. When the water reaches the desired level, this switch stops the water from flowing in the tub and then the washing program begins.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Will not stop filling with water.
  • Compare At

    $22.28
  • You Save

    $3.71
  • Your Price

    $18.57
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 4 reviews What's this?
1-4 of 4
 

16 of 17 people found this instruction helpful

Parts Used

  • Pressure Switch

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerStephanie from Charlotte NC

Sometimes water would keep running into machine and it would overflow.

I took off the cover behind the selector knobs and looked for the part that looked like the part I ordered. I unplugged a wire, took off the little hose, then twisted the part free. Twisting it free and twisting the new one back on was the hardest part, I even bled all over the machine from a cut I got while twisting! Then you plug the wire back in, there's only one way it will go, and put the little hose back on. I think it took less than 10 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 7 people found this instruction helpful

Parts Used

  • Pressure Switch

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerAmy from Newport NC

Water wouldn's stop running

First removed the screws on the contraol panel. Then I pulled the tubing from the part. Snapped teh switch preesure out. Put the new one in. Attached the tubing. Put control panel back together.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

  • Pressure Switch

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerPhoenix Center BHS from Warner Robins GA

The water fill level knob broke off and took shaft with it.

Removed the top panel and twisted the old pressure switch off counter clockwise. Then disconnect the electrical plug and the plastic hose attached to it. Do the reverse for putting the new one on. Very easy repair that you only need a screw driver for.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

  • Pressure Switch

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerDaniel from Fennville MI

Broken shaft

No problem with the replacement. Great company to order parts. Received them as expected.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4