Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS2322303
This slotted wheel is sold individually. It is white in color and does not come with the attaching axle. This part has been redesigned, and may be wider than the original.
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
This includes eight rollers with axles.
Simplest job ever. Ordered wheel and axles and when arrived pushed in the axle on the rear of the wheel and pushed onto the rack. Took less than one minute and working fine since.
Help other customers find the most helpful instructions.
Were these instructions helpful?
ordered replacement parts and when they arrived i noticed they were a differant part # then what was ordered and a differant wheel axle design and wow i don't thing these will brake like the others thank you PARTSELECT
This worked great. Cheap and easy.
I read others repairs for this problem on your website and copied what they purchased. I couldn't believe how easy it was to replace them. I can't believe I lived with no wheels for about six months!
Having ordered new axles and wheels, we easily took the old ones off and snapped on the new ones. Once we realized NOT to put the wheels on the axles before attaching them to the rack, the repair was super easy. Evidently GE had put inefficient axles on the original dishwaser and had subsequently redesigned them.
replaced axles and wheels, all (8) with new re-designed axles and wheels, better than new.
Removed racks and replaced snap in rollers in bottom shelf and installed new stops in top rack.No tools needed
simple pop old clips off snap new ones. new clips are a lot better made than the cheap ones that comes on it new.go ahead and get the new rollers even if you dont need them, all 8 of them are the large ones , they roll in and out easy.
Simple replacement. Also note lower rack comes with all wheels attached
The repair was quite easy. You simply take the new rollers and attach the pins to each of the rollers purchased. I gladly remove the old roller units. I placed each of the new rollers onto each pin of the lower rack unit, and snap them into place. The rack rolls with ease now thankfully!
I had called the manufacturer and their prices were outrageous and I still didn't have the part numbers. The partselect.com website was so easy to use that I instantly looked at the line drawings and was able to figure out what to order. It was a snap and I am not the most handy person. Their prices were good, and though I paid for the cheapest shipping, I got the parts the next day, which shocked me. They were an excellent company to deal with.
My husband was able to remove the wheels that were bending from the dishwasher rack. Then, he replaced the wheels with new ones and used new studs to hold the wheels in place.
It was sooo easy, I can't believe I took so long to get these new rollers and studs. Shipment arrived in 2 days, I removed those old melted wheels, through them away and installed the new ones, took me less than 10 minutes, it was painless, no tools needed. I did follow a tip from a buyer that was to attach the studs to the wheels prior attaching them to the lower rack and it was a very usefull tip. Do that! Now my dishwasher is like new again. Great shopping experience, Thank you!
The repair is just a couple of minutes job. All I had to do was to pop the wheel axle in the new wheels, remove the old wheels and put the new ones in. The wheel axles on the original one, were like clasps. All one needs to do is to pull the clasp to one side and slide the wheel out. The new one, just needs to be pushed in. In my case, I could have just swapped out the axles, but decided to change the whole set anyway.
Removed and replaced all rack wheels with new wheels and wheel axles. All I needed was new axles, as they are new and better, and solved the problem of the wheel falling off. G.E. should offer customers with this problem, new wheel axles at no charge, as they are very easy to exchange. The original axle was a bad design.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.