Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS2322303
This slotted wheel is sold individually. It is white in color and does not come with the attaching axle. This part has been redesigned, and may be wider than the original.
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
If you are having trouble rolling your dishrack in and out, there could be an issue with the rollers or axles. Check the existing rollers and axles for any visible physical damage. Look to replace the parts if the rollers or their axles are damaged. These rollers attach to the dishrack allowing the rack to roll in and out with ease. This pack includes 8 gray rollers measuring at approximately 1.75 inches L x 0.75 inches W x 1.75 inches H. Each roller comes with an axle.
Removed and replaced damaged wheels. Parts came in on time and saved lots of money on a repair rip off artest.
Help other customers find the most helpful instructions.
Were these instructions helpful?
After going on your website and reading some of the other stories, we couldn't believe how easily we could have resolved this issue! We called local appliance parts and sales stores and they gave us ridiculous prices to replace the wheels!! For a small amount, we were able to get the parts, (within 2 days!!), and I fixed it myself in about 15 minutes! You are wonderful and we highly recommend you and your services. Thank you!Melodie
After reading the good "posts" of others - - I decided to give it a try. Was a snap to do. I did all 8 wheels and wheel axels in less than 5 minutes. Wife is happy. I am happy.
I removed the old wheels and put on the new ones. The replacement wheel axel works so much better than the original parts and will last much longer
Looked up parts diagram on your Web Site found the parts number and ordered them. Problem was the diagram had two part numbers. One was for lower basket wheel assembly, the other was for lower basket (rear) wheel assembly. Ordered both and when I received the parts the only difference was color. Now I have front wheels in white and rear wheels in gray. Other tan that it was a simple repair and saved a costly service call.
Pulled off the old ones. Followed the advice from your site to put the new retaining clips on first. Then put wheels on retaining clips.
I received the rollers but not the stud rollers in my first shipment. I telephoned and explained that I also needed the stud rollers, which are the axles for the wheels. The stud rollers were FedExed immediately with the shipping waived.I popped the wheels onto the stud rollers and then popped the assembled roller and stud onto the basket. You can not make a mistake if you put the roller(wheel) on the stud roller(axle) before putting it on the basket. There is then only one way it will pop onto the basket. These are much better stud rollers than the original eqipment ones. They grip tight and don't slip off.
Took off ols clips and wheels and replaced with new ones in no time
I just pushed the stud roller onto the roller wheel and then onto thedishwasher lower rack. The stud roller is the axle and it took a little pressure with a plier but they are very secure now. It could not have been easier. I should have done it long ago. The dishwasher wheels starting breaking off before the machine was a year old. I use the dishwasher not even every day and nothing odd was done to the wheels it was just a very poor design. One wheel broke, then another and so on until every night I had to balance the rack on broken wheels just to run it. So frustrating and now perfect, sturdy, smoothe rolling rack thanks to your easy to use parts. Thanks so much
Fortunately I read the reviews and someone suggested purchasing the stud roller with the rollers. Great Suggestion. It was actually the stud rollers that were broken. It was as simple as taking the old rollers off, inserting the studs into the new rollers and snapping them in place.
Parts came in quickly. They were exactly what I ordered. Removed old parts and replaced with new ones in less than 15 minutes.
This was really easy. I agree with the other posters that I read about before I purchased new wheel and axle components. It took all of about 5 minutes to do, it was really simple and well worth the money spent. DON'T wait any longer lifting that tray out ...get the parts and fix it, you will be happy you did!! Very Happy : )
Everything was just snap it together. I snap the bushing into the wheel and snaped the wheel into the lower rack of the dishwasher.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.