This is a replacement haliant element for your cooktop or range. It is used with flat top ranges, and is found under the glass top of the range. This element is approximately 12 inches in diameter and is sold individually. The haliant surface element supplies the heat needed to the top of the cooktop. If your burner is not lighting up when it is turned on, you may have an issue with the haliant surface element. Be sure to disconnect power to the range before you begin this repair. To replace the element, remove the screws holding the cooktop in place, then remove it. Remove the screws holding the burner in place, disconnect the wires and replace the burner. Replace the cooktop and screw it back in to complete your repair.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your General Electric Range Triple Haliant Element - 12 Inch
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Cooktop.
This part works with the following products:
General Electric.
Part# WB30T10126 replaces these:
AP4344521, 1474212
Customer Reviews
Average Rating:
★★★★★
★★★★★
18 Reviews
4.7
Filter By Rating:
5 Stars
16
4 Stars
0
3 Stars
1
2 Stars
0
1 Star
1
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Cheryl M - March 22, 2023
Verified Purchase
Easy repair-works great
Part arrived quickly. Easy to replace and works great. Would order from PartSelect again if needed
★★★★★
★★★★★
Jeffrey G - September 2, 2022
Verified Purchase
It worked for less than 1 week
Unfortunately, I had to pay $160 for the installation. The tri-ring burner worked for less than 1 week. After that, the outer ring stopped working. Due to the cost of labor, i am going to have to live with the malfunctioning burner. Be warned, don't buy this item.
November 9, 2022
Thank you for your review. We're sorry to hear that happened, we will be in touch soon to help fix this issue.
★★★★★
★★★★★
Stephen D - April 30, 2021
Verified Purchase
Triple Haliant burner
The original burner was not working, after removing it I could see a few of the coils were damaged. the new part was delivered quickly and fit perfectly. the entire job took less than fifteen minutes to complete and was a simple process.
★★★★★
★★★★★
Johanne P - April 29, 2021
Verified Purchase
Ea
Good
★★★★★
★★★★★
Lisa W - August 12, 2020
Verified Purchase
Easy replacement job.
Fast shipping and easy install. Back up and running again!
★★★★★
★★★★★
Richard N - May 1, 2020
Verified Purchase
Ge stove top
The part arrived and works ok.,
My only complaint is: The part was way over priced!
★★★★★
★★★★★
Gregory J - April 15, 2020
Verified Purchase
Just what I needed
The part was just what I needed. Watched a YouTube video for installation help. In 35 minutes, everything was working great again!
★★★★★
★★★★★
Jeffery E - February 20, 2020
Verified Purchase
Worked perfectly.
Just what I needed. Delivered very quickly, super easy process.
★★★★★
★★★★★
Rosslyn T - June 17, 2019
Verified Purchase
Easy to order easy to repair
Part was perfect
★★★★★
★★★★★
Paul C - February 18, 2019
Verified Purchase
perfect
part was perfect, easy to replace
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 7 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
One of the heating elements wasn’t working.
I just watched the video that was on the website. It showed in detail how to replace the heating element. After watching it I was able to remove the cooktop, replace the heating element and put it all back together. The only issue I had was getting the cooktop loose but once I did everything else was easy.
Adam from WEST JORDAN, UT
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to replace 12 in heating element
Took a picture of the old heating element to make sure that when I replaced the new element the wires were in the exact location as before.
Steve from ELMONT, NY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Returned Part to your location per Returns, Reference 15681540.
Part WB30T10126 Triple Haliant Element-12 Inch was returned to you under Returns Reference 15682540. Mailed by USPS Tracking #9505 8161 4647 1005 7628 41. According to USPS, it arrived at your location Friday, Jan. 15, 2021 @ 10:49 AM. Please advise. Thank you, William Deal
William from FREDERICKSBRG, VA
Difficulty Level:
Very Difficult
Total Repair Time:
30 - 60 mins
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Loss of the two center burners
Removed the two sheet metal screws securing the range top after disconnecting the power. Removed the mounting clips to the old range element and installed the new one. It was an easy fix.
Christopher from CLATSKANIE, OR
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My large burner on my glass top range quit working
First I found a u-tube video on how to repair this. I found the model number of my stove and used my phone to take a picture of it. I found the part on part select.com and ordered it. It came within a few days. Turn off electricity to the stove. There were two screws to loosen and allow me to lift the glass stove top. It did not
... Read more come off and we made a stick to hold it open. Then we unplugged and removed the old burner paying attention what was plug in where, maybe 4 plug ins. Then we clipped it back in, closed the top, rescrewed the top on. Turned on the electricity. It took 10 minutes to replace. Very easy!
Read less
Jeanne from CHEHALIS, WA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Center Burner of a triple element wasn't working
Been procrastinating putting in the new element but decided to do it yesterday even if it meant eating breakfast out. Twenty minutes after starting , breakfast was cooking, at home on the new element. Two screws out, switch wires, snap on retainers, replace two screws and you're done!
Richard from WOODLAND, WA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
10 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
9in portion of heating element inoperable
first ,troubleshot switch--it was ok. next,troubleshot triple element & found that the 9in portion had an open in the heating element itself ordered .new element,installed it .Works like new!
John from LEWES, DE
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
20 of 28 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
15 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ann
January 28, 2018
The smallest ring on this 3 ring element does not heat up. Do i need to replace the entire element or is there another consideration?
For model number PB970SP3SS
Hi Ann,
Thank you for your question. If the middle portion of the ring is not lighting up, then the entire element would need to be replaced. I hope this helps. Thank you and have a great day!
33 people found this helpful.
Was this helpful?
Thank you for voting!
Charles
October 21, 2017
Is the above listed part number a genuine GE part??
For model number PS2321560
Hello Charles, thank you for contacting us. Yes, this is a GE original equipment manufactured part. We only deal with OEM parts. Good luck with the repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Aijaz
May 15, 2019
The right burner won't come on, found a burnt out switch that I've replaced once before, replaced a new switch again but stove doesn't come on, do I replace the entire element, part no. 58 on the list.
For model number JB710ST3SS
Hello Aijaz, Thank you for the question. When the switch burnt out it could have also shorted the element and it will need to be replaced. Thank you for your inquiry, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Rosa
January 4, 2020
The triple burner is only heating the inner ring and can't control the heat. When I lower heat to low, it is still very high
For model number JBP89DM2BB
Hi Rosa, it is either a faulty switch or element. You can test these parts with a mulitmeter if you have one. Thank you for your question and good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
July 2, 2021
I have a GE profile model PS978ST1SS. The smaller center element of the front right burner does not work. The other two elements on that burner work just fine. Before I call a service tech, do you have any idea on what the problem might be?
For model number PS978ST1SS
Hello Tom, Thank you for the question. Normally this is an indication the Element will need to be replaced. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Lee
May 7, 2019
My electric range front left burner does not work.
For model number JB705ST1SS
Hello Lee, thank you for inquiring. For this symptom you will want to replace either the 9" Dual Radiant Element part PS2321567, the 9" Surface Burner Switch part PS1765835, or the Terminal Block Kit part PS953027. We hope this helps.
Was this helpful?
Thank you for voting!
Bill Cazier
November 7, 2017
The smallest element of the 3 element burner does not work. Previous comments say to check the switch and the elements. I checked the 3 elements and do not find an open circuit. Where is the switch i should check other than in the control panel?
For model number PS978ST1SS
Hi Bill,
Thank you for your inquiry. There are no switches listed under you model number. You will need to check the touchpad and the electronic control board to see which one is causing the issue. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Jeff
January 16, 2020
I am trying to find the triple radiant element for my Kenmore elite range glass top ... the model number is 790.46613500... the back of the element case shows that it is 3000w / 2000w / 1200w. i am finding part numbers showing frigidaire element #wci 318297805 but i can't see that it's exactly the same wattage. can you check what part i need?
thanks
For model number 790.46613500
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Element (Part# PS1529277)
My triple element front right only middle element not working. Other two fine. How to proceed. Range hardly used since bought.
For model number JB745DF2WW
Hello Seymour, Thank you for the question. Since the element is one piece, the Triple Haliant Element, PartSelect Number PS2321560 will need to be replaced. We hope this helps.
Was this helpful?
Thank you for voting!
Zhongbin
March 18, 2020
Is this part 240 volt, 3000 watts whit tri ring 6" 9" 12" ?
For model number JCS968SK4SS
Hello, Thank you for your question. I apologize for the inconvenience, however we do not have that information. You will need to contact the manufacturer directly. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
