Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS232148
Screws NOT included.
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
Screws are NOT included. White in color.
unsnap the outer and inner door coverings and remove the screws holding the outer door handle.If a piece of the handle has broken off inside the door housing, you will need to remove the piece before reinstalling the new handle. Align the handle properly, screw in place and re attach the outside door and snap the inside door covering in place. Done !
Help other customers find the most helpful instructions.
Were these instructions helpful?
My door handle broke off right where the screw attaches to the door, leaving the small cylindrical portion of plastic still attached to the screw. Taking the door apart took a little while because the door handle screws are not easily accessible. It's not hard (with the help of the diagram), just time consuming. The only difficult part was getting the screw out since the plastic was still attached. I had to push the plastic in really hard with one hand with needle nose pliers and unscrew with the other hand.
Finnaly found exploded view of door, but had to guess how to remove snap in escution that covered the screws. Broken end of old handel piece spins with screw, so I am waiting for help to hold the front end, so I can remove the screw from the other side. Repair has yet to be completed!
Had to remove the interior cover of the door to access the handle screws. Remove these screws and insert the new handle. This is a stovetop model so between the constant pushing and pulling on the handle together with the heat from the stove, the handle breaks. This is the second time I've had to replace it in 5 years...but again, it's an easy inexpensive fix.
Removed inner trim panel. Bottom screw was visible But upper screw was behind metal frame that trim plate snaps onto Removed that to access screw. Door latch had to be removed to. Not a big deal just be sure spring on latch is reinstalled same way it was removed. Took longer than expected but way cheaper than a service call. Part arrived on time
Removed plate inside door cover and removed old screws and plastic handle. Reassembled.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.