Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/GE/00125825i05.gif
See part 110 in the diagram
http://www.partselect.com/Schematics/GE/00125825i05.gif

THERMOSTAT

PartSelect Number PS2321365

This part will trip once the inside of the cavity overheats and exceeds the recommended temperature.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Won’t turn on.

Compare At

$16.32

You Save

$2.72

Your Price

$13.60
Order within the next 12 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.8 / 5.0, 3 reviews What's this?
1-3 of 3
 

41 of 68 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Michael from Coulterville, CA

No power to microwave, no heating.

Unpluged power cord!! Removed front control panel to expose electronics (need to remove top horizontal vent cover to expose mounting hardware). Unplugged leads to control panel board. Removed magnetron with Tstat (3- phillip heads, need stubby). Installed new parts and control panel, plugged it in tested. Done.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 11 people found this instruction helpful

Parts Used:
  • THERMOSTAT
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Florentino from West Palm Beach, FL

No power

Check with Digital meter all connections.Find a Thermostat open loop.This thermostat is near the Megatron .

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • THERMOSTAT
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Pliers, Screw drivers
Customer: G. Wayne from GARDNERVILLE, NV

To heat a cup of coffee, user entered "10:00" instead of "1:00". Mess! After cleanup, microwave ran, but would not heat. While running, it made 2 or 3 time the noise volume as before.

I went for the cheap things first. Ohmmeter showed one of the thermostats in the magnetron compartment was open. I ordered and replaced all three thermostats. Still no heat. I took the unit off the wall (aaarrgh!) and checked the oven cavity thermal cutout. It said 7 ohms. I tested by shorting the wires together, but still no heat. So, I ordered the magnetron and diode cable. When replacing the diode cable (be sure to discharge the big cap!) either I broke it, or it was already damaged. It came off in two pieces. The new diode cable was re-enforced with thick heat shrink tubing, to prevent such breaking. You need a very short screwdriver to replace the magnetron. Now, all fixed! ~$150. A new one lists for $2000, installed in the overhead. My wife thinks I am a genius.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3