Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jared S - 19 days ago
Verified Purchase
Perfect fitn
Delivery was quick and was an exact match to what I needed.
★★★★★
★★★★★
June M R - 21 days ago
Verified Purchase
Moderately easy to replace
My appliance is back in working order but has a new vibration noise.
★★★★★
★★★★★
Rex S - June 4, 2022
Verified Purchase
Broken handle space maker ge
The part came quickly encouragement from customer service applicants work
★★★★★
★★★★★
Darwin O - May 31, 2019
Verified Purchase
Replacement handle
Perfect fit and wasn’t too hard to install. The instructions available on a someone’s post were not detailed enough and had to figure a few things out on my own. Once I had a plan of action, it was easy.
★★★★★
★★★★★
Judy M - February 26, 2019
Verified Purchase
Microwave handle
The part was delivered when expected and the repair was simple!
★★★★★
★★★★★
Adrienne E - June 21, 2018
Verified Purchase
repair went as expected
fast shipping and exact fit. No problem with repair
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 12 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replacement of Door Handle
Gently remove the interior trim with a putty knife. Remove the two screws holding the old handle in place. Replace the new door handle. Screw the new handle in place. Align the trim and snap it back in place. Confirm the door handle is secure. I applied a little Gorilla Glue to the new handle for added strength before screwing it o
... Read moren.
Read less
PHIL from HICKSVILLE, NY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door handle broke
Popped the inside trim off took out the screws for old handle reversed process
Rodney from MERRILL, WI
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken handle
Open micro owen door. With a spatula(or knife) remove the plastic ban around the glass . It will pop out without any problem. Then remove old parts, save the screws(None given with the spare part), Adjust the new handle and put the screws. The secret is the removal of the plastic around the window Then an easy job...
jacques from POMPANO BEACH, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door handle broke
Followed instructions listed here that I needed to separate the inside facing on the door with a butter knife so that I could see the two screws that held the handle in place. Easy off, easy on. And I am NOT a very good handy man.
Dana from Spanaway, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Handle broke away from door@bottom.
Removed the 1 inch plastic frame on inside of door, gave me access to 1 set of screws. The problem I encountered was, getting to the set that holds the handle to the door.I didn't realize the metal frame held the outside with flexible hooks, therefore once u snapped them off, the outside with the handle on it HIT the floor glass and all!<
... Read morebr />Fortunately it didn't break. Supporting the outside is most important.
Read less
Dorcelle from Sarasota, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
9 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken handle on a microwave door
Open the door. Pry out the plastic cover shield to expose the bottom screw. Remove the screws and the remains of the broken handle. Install the new handle. Reinstall the cover.
Piece of cake!
Steve from Sarasota, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
7 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken door handle
First i pick up all the tools that I thought would be needed for the door handle replacement. I looked at the exploded diagram online, but did not know how to remove the inside panel to expose the handle mounting screws? I did not want to break any more plastic parts by pulling to hard on the old weaken parts. I have 30 years experience
... Read morerepairing office and banking equipment but never took a microwave apart.. Next I read two reviews by two different women explaining how easy it was to take off the inside panel with a butter knife---yes a butter knife. The knife worked great and I never would have used a knife. Everything just unsnapped from there on. Thank You to those women.
Read less
ED from Santa Clarita, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
13 of 15 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Handle
First removed the inner panel. Use kitchen knife. Panel is snapped on. I could not remove hinge end so just pulled panel back. Two screws are then easily removed . Then the handle end top and bottom of outer panel must be snapped off. I could then get enough clearence to remove the two other screws which go thru outer panel only. I replac
... Read moreed the handle and reassembled in reverse order.
Read less
Muriel from Lady Lake, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
11 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Had to replace the door handle on my microwave
I removed the inner bracket that held the glass in place with a nylon dish scraper that we use to clean our pots and pans with. It was safer than using a screw driver. I inserted the tapered portion of the scraper between in the bracket and the door edge on the inside of course,then slid it across the opening all around the door until the
... Read more it separated. Making it easy to remove scews for the handle and the glass bracket.
Read less
JOHN from McKINNEY, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Handle broke and cracked outer frame
First remove the inner frame, take out the two screws holding the handle on. Detach the handle and outer frame making sure you hold the glass as this comes out with the frame. Fit the glass into the new frame, fit the frame to the door, sit the new handle in position and screw the two screws through the door skin and outer frame.Clip the
... Read moreinner frame in position and job done. It's as easy as that.
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Susan
August 14, 2017
Door handle broke off . Need to order handle . Is there another part inside the door i might need to order to put back on. And can you sen instructions on how to take apart to put back on?
For model number JVM1660WB001
Hi Susan,
Thank you for your inquiry. This would be the correct part for your model number. To remove the old handle, you will first have to disconnect power to your appliance. Then open the door. Using a putty knife, pry the trim on the back of the door off from the front. There are little retaining clips all around the front outer frame of your door that hold the back trim in place. Once you have that trim out you will have exposed the screws that keep your handle in place. Unscrew those screws, reuse them to install your new handle. Snap the back trim back into place. Good luck with your repair.
16 people found this helpful.
Was this helpful?
Thank you for voting!
Michael
November 21, 2018
How to install door handle
For model number jvm1305ww002
Hello Michael, Thank you for the question. Here is a repair story sent in by a previous customer.
1. I removed the top handle screw on the inside of the door (visible)
2. I removed the plastic seal from around the glass window on the inside of the door (pried out with screw driver; comes out easily)
3. I removed the lower handle screw on the inside of the door (hidden under the plastic seal)
4. Replaced the handle and screws
5. Re-installed the plastic seal
6. Door works like new.
Hope this helps, good luck with this repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Marcia
May 1, 2018
Will this replacement handle work on my microwave, model # above? Door handle
Your price
$59.34
in stock
add to cart
get this part fast. average delivery time via standard shipping: 1.8 days.
partselect number ps232103
manufacturer part number wb15x10023
manufactured by GE
For model number JVM3160DF2WW
Hi Marcia,
Thank you for your question. No, this handle will not work on your microwave. The part number listed under your model number for the door handle is PS8754173. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joseph
December 18, 2019
Will door handle manufacturer part number wb15x10023 fit GE spacemaker xl1400 model jvm1430wa 001?
For model number JVM1430WA 001
Hello Joseph, thank you for your question. The door handle for that unit is PartSelect Number: PS232103 in white. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Robert
January 14, 2020
I need a replacement door handle for my GE microwave oven, model jvm142k. Is this something you can assist me with?
For model number JVM142K
Hello Robert, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Door Handle part# PS232241.
Step by step, instructions on replacing the handle on the GE spacemaker microwave.
For model number JVM1440WD003
Hello Ron, Thank you for the question. To remove the old handle, you will first have to disconnect power to your appliance. Then open the door. Using a putty knife, pry the trim on the back of the door off from the front. There are little retaining clips all around the front outer frame of your door that hold the back trim in place. Once you have that trim out you will have exposed the screws that keep your handle in place. Unscrew those screws, reuse them to install your new handle. Snap the back trim back into place. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
