Quick Question!

Have you ever purchased from PartSelect.com before?

232100-1-S-GE-WB15X10020        -Door Handle
232100-1-S-GE-WB15X10020        -Door Handle 232100-2-S-GE-WB15X10020        -Door Handle 232100-3-S-GE-WB15X10020        -Door Handle http://www.partselect.com/Schematics/GE/00010426i01.gif

Door Handle

PartSelect Number PS232100

Screws are NOT included.

This part works with the following brands: GE, Hotpoint & Kenmore.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Door Handle

Part Number 232260

This white handle does NOT come with the screws.

$78.10
No Longer Available

Tapping Screw

Part Number 234666

$1.81
No Longer Available

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 38 reviews What's this?
1-15 of 38
 

485 of 489 people found this instruction helpful

Parts Used:
  • Door Handle
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Kristofer from Wayne, PA

Microwave door handle broken

This repair is simple if you know what needs to be done. In my particular case, only the top screw was exposed from the inside of the microwave door. In order to get to the bottom screw, I had to pry the thin, rectangular trim away from the door. A thin, hard pry blade works good for this. Once you get one corner free, the rest of it pulls off pretty easily. I removed both screws, replaced the handle with the new one and secured the new one with the old screws. The new handle does NOT come with new screws, so you will need to buy new ones if you don't have the screws from the previous handle. Overall, it was a very simple fix worth doing yourself.

Help other customers find the most helpful instructions.

Were these instructions helpful?

445 of 526 people found this instruction helpful

Parts Used:
  • Door Handle
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Bernadette from Arlington, MA

Broken handle

I removed the screw from top. I pried of the edge with the casing with the flat end of a screwdriver. I removed the bottom screw. I then put the new handle in place and screwed it in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

149 of 213 people found this instruction helpful

Parts Used:
  • Door Handle
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: BART from MASSAPEQUA PARK, NY

Broken handle at lower screw

Opened door, partially removed inner frame holding window in place by carefully sliding a small putty knife along outer edge of frame.This was the key to get to lower screw. This frame is held in place by plastic nubs on frame.. Be careful.
Removed upper and lower screws holding handle and replaced old handle with new one using same screws. Reset frame by gently pushing it back in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

178 of 323 people found this instruction helpful

Parts Used:
  • Door Handle
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Biddanda from Johnson City, TN

The door handle broke at the at the point where the handle screws to the door

Unscrewed the top screw from indide the door panel. To remove the lower screw I had to gently separate the square seal which goes on the inside door panel. Once I removed the two screws, I could attach the new handle, put the lining back and the job was done.

The new part did not come with new set of screws. It should have!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

160 of 302 people found this instruction helpful

Parts Used:
  • Door Handle
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Carol from Cornwall, NY

Broken door handle

First I removed the upper handle screw. In order to get to the second screw holding the bottom of the handle, I removed the inner door window seal with a putty knife then removed the second screw. I installed the new handle, attached the screws and replaced the seal and that's all there was to it. The whole repair was done in 2 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

151 of 289 people found this instruction helpful

Parts Used:
  • Door Handle
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Charles R from Harrisburg, PA

Plastic handle broke off at the bottom

Removed one screw on the inside of the door, upper left hand corner. With a small knife,lifted the small plastic seal around the inside glass. Removed the 2nd screw at the bottom left on the inside of door. Attached the new handle with the two screws, replaced the plastic seal on the inside and it was ready to go. Simple and took less than 10 minutes. No service call or repairman required. Reviewing the comments at your website was very helpful to get started. Thanks for a great deal! Chuck in Harrisburg,PA

Help other customers find the most helpful instructions.

Were these instructions helpful?

147 of 287 people found this instruction helpful

Parts Used:
  • Door Handle
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Dan from Arlington, VA

Plastic handle to over-range microwave broke and need to be replaced

Firts removed the phillips head screw securing the door handle on the inside top of the microwave door. Then used putty knife to dislodge the plastic surrounding the window on the back of the microwave door...thus uncovering the 2nd screw that holds the bottom of the plastic door handle. Removed the 2nd screw. Removed the broken handle. Put the replacement handle in position and secured with the two phillips head screws. Pressed the plastic back in place around the door window. Voila! It's done. Took about 10 minutes

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 4 people found this instruction helpful

Parts Used:
  • Door Handle
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Phillip from Lawton, OK

The bottom screw holding the handle to the door broke off.

First I remove d the top screw which can be seen when the door is open. Next I gently pried the plastic rim away from the inside of the door which uncovered the bottom screw.
Placed the new handle in position and reversed the removal process, carefully tightening the screw, being careful to not overtighten. Snapped the plastic rim back into place and the job was done.
The whole repair took less than 5 minutes! I saved big bucks by doing it myself and it is not difficult as long as you can operate a screwdriver!

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 4 people found this instruction helpful

Parts Used:
  • Door Handle
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Michael from Alexandria, VA

Plastic door handle broke off

I ran into the same problem everyone does when doing this job. I found and removed the top screw from the back of the door but could not see the bottom screw so was unsure how to remove old broken plastic piece from lower handle attachment point and reinstall new. I went back to the website and found the comments from others re how to do this and from there it was a 2 minute job. The only thing I would add is a caution: When removing the wide black plastic flange from inside the door (to access the bottom screw) pry it out carefully all around. If you pry open only at the handle end and start pulling away there is a risk of snapping the flange

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used:
  • Door Handle
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: James from Grant Park, IL

Original part cracked

I removed one phillips screw on the inside of door. Took a butter knief and popped the strip on the inside of door to expose the 2nd screw. Attached the new handle using the two original screws. Less than 5 min. Piece of cake.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 6 people found this instruction helpful

Parts Used:
  • Door Handle
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Christopher from Brooklyn, NY

Broken handle

First I opened the door of the microwave oven and unscrewed the top screw holding the handle to the door. Then I removed the dor gasket which obscured the bottom screw. Then I unscrewed the bottom screw and removed the broken handle. Unfortuantely, this is the second time I have had to replace a broken handle. The handle is quite simply not strong enough to endure normal usage over time. If you pull the handle in a hurry and in an awkward way it will break. Shame on you, GE. Anyway, installation of the new handle was the reverse of the removal of the broken one. Very simple. I saved myself an expensive service call and the delay in getting it replaced, PartSelect got the part I ordered to me in 24 hours! Thank you very much!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used:
  • Door Handle
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Anita from Umatilla, OR

Door handle broke off at bottom.

Took the microwave door off. Then read other repair stories here online and discovered that wasn't neccesary. So when the handle arrived I only had to unscrew the top visible screw, pry the bottom plastic strip off the door to reveal and remove the hidden screw. From there it was only a matter of seconds to attach the new handle and snap the plastic strip back in place. Only thing I need to mention is we did not realize the part would be coming from Canada and were surprised to see the additional postage fee charged to our debit card. Felt that should have been added up front. Not a problem, just a surprise.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used:
  • Door Handle
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Jim from Royal Oak, MI

Broken door handle

There was one screw on top that was easily accessable, but the lower one is hidden. I first removed the door seal that goes around the outside of the door but, that didn't expose the screw. On the inside of the door there is a seal just for the glass window. I used a butter knife to open just a section of it and it immediately exposed the screw that I needed to remove.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used:
  • Door Handle
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Fabio from Orlando, FL

Door handle broke

The repair was relatively ease. I have to tell you that what helped me the most was reading the experiences others had had. The repair took me qabout 7 minutes. Simply take a puddy knife and carefully take out the ring around the glass on the indide of the door. Once removed you will see the botoom screw. The upper screw is very visible. Remove the two screws and replace....its that ease.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used:
  • Door Handle
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Victor from Cocoa, FL

Handle was broken at the bottom attachment point

I had to figure out how to get one of the screws out because I could only see the head for one of them. I removed a strip of plastic that goes around the inside parameter of the door. With that removed I foud the other screw head. I removed the remaining screw and there you have it. Put it back together and your done. . The strip around the door just snapped on so that was easy. The big problem: I received the wrong door handle from PartSelect but they had the new handle at my door the very next day. I don't know haw they did that. From Kentucky to cocoa Florida in less than 24 hours. I may have ordered the wrong part but still my Microwave was broken for four days total. I know this sounds like an ad but I'm just happy with the service. Thanks PartSelect.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 38