Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/GE/00012222i03.gif
See part 136 in the diagram
http://www.partselect.com/Schematics/GE/00012222i03.gif

Door Handle - Black

PartSelect Number PS231955

Handle only.

This part works with the following brands: GE, Hotpoint & Kenmore.

Compare At

$44.51

You Save

$7.42

Your Price

$37.09
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.4 / 5.0, 3 reviews What's this?
1-3 of 3
 

8 of 8 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Socket set
Customer: Michael from Midland, TX

Built in double oven, top door hinge and handle were broken

Could not find any instructions in the owners manual. Spent 30 minutes removing screws around the oven trying to get to the hinge and fortunately I finally removed the facing where the controls are. I found a technicians guide behind it which had diagrams and instructions for removing the 4 screws attaching the oven to the cabinetry. This released the entire oven assembly so it would slide out 6 inches for access to the hinge. Everything went easily then!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Door Handle - Black
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Joyce from Houston, TX

Children used it for a chin bar and broke the handle and the piece that holds the handle on

We had to buy washers and screws to hold the handle on.
Then all we did was undo the screws that were on the side of the door. place handle on door screw the new screws and washers that we had to buy and replace the side screws and it was fixed.

The only problem that I found was that the handle kit did not come with screws or some kind of attachment to hold the handle on the door. We had to buy extras at the hardware store for that.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: ROBIN from LAKESIDE, TX

Holes on new element did not match up with oven holes

had to drill new holes

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3